Re: MP 4001 SC995 ERROR
It is the board mounted in the slideout rack that has the Ethernet, SD slot, memory module and HDD mounted on it.
-
Re: MP 4001 SC995 ERROR
Please excuse my ignorance lol....not sure which is which. I replaced the board that is mounted in the pullout rack that has the ethernet port on it.
It also has the SD card slots, the memory module and HDD attached to it.Leave a comment:
-
Re: MP 4001 SC995 ERROR
ok ... by main board do you mean the controller or the bicu?Leave a comment:
-
MP 4001 SC995 ERROR
Hi all, I have spent many hours searching for answers to this problem to no avail. I have learned this is a serial number mismatch, but I can't find how to solve it.
Back story: This machine worked perfectly with the exception of the ethernet port. Could not get it to connect to the network. I ordered a main board on ebay to
hopefully fix the failed ethernet port. The replacement board matches the existing one exactly, but upon powering up the machine the red dialog appears with
SC995. It won't allow me access to much, and I can't find any info on how to solve this problem. I know it is probably is a serial # mismatch with the new controller
board but how do I reach the screen to enter the correct information?
Leave a comment: