If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
now armed with the SM entry info... I sure hope you don't BRICK the machine messing around in there where you don't know what you are changing
I have it
it says ask your supervisor ( i think you never read that)
am professional with all canon copiers
but i have problem with this machine for the first time
but really you are a very good people in ricoh
you need to learn how to answer with respect like canon guys
It's not that you are a Canon guy, the thing is, the way to get into service mode is not public information because people that shouldn't be in service mode will be in there messing things up. So it's not posted on an open forum.
I have it
it says ask your supervisor ( i think you never read that)
am professional with all canon copiers
but i have problem with this machine for the first time
but really you are a very good people in ricoh
you need to learn how to answer with respect like canon guys
no disrespect meant....
IF you aren't sure about the proper procedure, you CAN trash unit.. Hell I've seen RICOH techs do it.
it isn't smart to post SM entry in public... there are too many END USERS here that do no have a clue.
In as much as the 6 digit number for all current models can be changed by the service tech and that some companies have their techs do so to prevent competitor from sabotaging their clients' machines, you would be best to ask the dealer who originally sold the machine.
It's not that you are a Canon guy, the thing is, the way to get into service mode is not public information because people that shouldn't be in service mode will be in there messing things up. So it's not posted on an open forum.
Okay ...
if i need help and the ricoh guy in my area is a very bad guy and my client need help where i can find the way to enter the sp mode in private....
Comment