Ricoh MP2554 fuser in an MP2555

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Dan G
    Technician

    50+ Posts
    • Nov 2014
    • 56
    #1

    Ricoh MP2554 fuser in an MP2555

    has anyone tried to install an MP2554 fuser in an MP2555 or vice versa with any success?
    Parts manual shows fuser sleeve as different part # but I cannot find any explanation as to why it has a different part number?
    Tags: fuser, mp2554, mp2555, number, part
    • GIUBOSS
      Service Manager

      Site Contributor
      1,000+ Posts
      • Jul 2013
      • 1385
      #2
      Re: Ricoh MP2554 fuser in an MP2555

      hello, in my opinion the group would be able to install it but it will give error code type sc54x, since the pressure roller thermistors are with different codes.

        Comment

        • Imprestik
          Trusted Tech

          250+ Posts
          • Aug 2012
          • 296
          #3
          Re: Ricoh MP2554 fuser in an MP2555

          I have done this and it works with no issue at all.

          Unknown as to why the part numbers are different as well as all thermostors, thermofuses have exact same part numbers

          I have even installed a 54 complete fusing unit into a 55 with no issue at all

            Comment

            • Mark Bbb
              Service Manager

              1,000+ Posts
              • Jun 2012
              • 1662
              #4
              Re: Ricoh MP2554 fuser in an MP2555

              my experience? never mess with a Ricoh!

                Comment

                Previous template Next
                Working...