Hi there!
There is a device with dead LCD Controller. I hardly managed to find a controller PCB from similar device which used to work normally so now it's booting and basically the device is back to life. One issue remains though: home screen is nice and clear but some menu pages show some garbage messages and improper soft buttons images. I'd assume that LCDC F/W just doesn't match main controller and/or engine ones.
I don't really know is it appropriate to ask here again about such an old model but would anyone be so kind providing the latest valid firmware files (SD card: at least LCDC, System, Engine) for this device so I could finish the job? - it would be a real shame to give up that close to the end...
Been working as a certified CSE for Ricoh for 20 years but had to move on lately so lost my access to my-ricoh portal :|
Any assistance will be highly appreciated.
There is a device with dead LCD Controller. I hardly managed to find a controller PCB from similar device which used to work normally so now it's booting and basically the device is back to life. One issue remains though: home screen is nice and clear but some menu pages show some garbage messages and improper soft buttons images. I'd assume that LCDC F/W just doesn't match main controller and/or engine ones.
I don't really know is it appropriate to ask here again about such an old model but would anyone be so kind providing the latest valid firmware files (SD card: at least LCDC, System, Engine) for this device so I could finish the job? - it would be a real shame to give up that close to the end...
Been working as a certified CSE for Ricoh for 20 years but had to move on lately so lost my access to my-ricoh portal :|
Any assistance will be highly appreciated.
Comment