Ricoh Pro C5100s cyan issue.

[tsbservice]

Re: Ricoh Pro C5100s cyan issue.

This pattern definitely looks like depleted developer. You should find why following other Ricoh techs advices.

[Draken]

Re: Ricoh Pro C5100s cyan issue.

SC320-02 is a Development Power Pack Output Error (C). And the CQ issue is with the Cyan. It is an output short, most likely in the development unit but could wiring from the power pack to the development unit. Replace the Cyan development unit.

I have tried that already. I had an old cyan development unit that worked fine, Besides a banding problem. The current problem is the same with both units.

[Draken]

Re: Ricoh Pro C5100s cyan issue.

This pattern definitely looks like depleted developer. You should find why following other Ricoh techs advices.

Is it posable for it to be depleted after only 12500 copy's since I replaced it last?

[copier tech]

Re: Ricoh Pro C5100s cyan issue.

I have tried that already. I had an old cyan development unit that worked fine, Besides a banding problem. The current problem is the same with both units.

Take the cyan dev unit out & visually inspect it see if it has depleted developer.

[slimslob]

Re: Ricoh Pro C5100s cyan issue.

I have tried that already. I had an old cyan development unit that worked fine, Besides a banding problem. The current problem is the same with both units.

Replace means with a new unit.

[mga]

Re: Ricoh Pro C5100s cyan issue.

I have tried that already. I had an old cyan development unit that worked fine, Besides a banding problem. The current problem is the same with both units.

If you take a used development assembly from a other machine it would of be set up the machine it came from thats its now u/s when you install NEW developer with or without the assembly you need to run a set up for TD level etc