MPC3503 won't print out faxes

[slimslob]

Re: MPC3503 won't print out faxes

User Switch
SW11 Auto reduce should be ON it's set to off

I'm sorry but Auto Reduction is not SW11. It is SW10 bit 3. Having it off is Default. All that it will cause is that an alarm will sound and user will be prompted to load the required paper size. Many people do not want the image reduced.

[slimslob]

Re: MPC3503 won't print out faxes

As requested here are System Parameter, User Parameter and Non Defaults lists

I am seeing two potential settings that could be your problem.

1. User Switch SW14 bit 0, Night printing mode is ON. Faxes will only be printed when machine goes into night mode. If night mode is not set up on the machine, it will never go into night mode.
2. User Switch SW32 bit 0, Select destination type priority is set for Electronic Output. Should be set to Papwer Output unless some type of fax forwarding is being used.

[bsm2]

Re: MPC3503 won't print out faxes

I'm sorry but Auto Reduction is not SW11. It is SW10 bit 3. Having it off is Default. All that it will cause is that an alarm will sound and user will be prompted to load the required paper size. Many people do not want the image reduced.

Auto Reduction is WHAT is will reduce oversize to fit on paper

Auto Reduction


Sets the machine to reduce the size of a received fax if it is too large to print on a single sheet of paper.


Note that the machine only reduces the size down to 74%. If further reduction is required to fit the fax on a single sheet, it will be printed on separate sheets without being reduced.


Default: [On]

[slimslob]

Re: MPC3503 won't print out faxes

Auto Reduction is WHAT is will reduce oversize to fit on paper

Auto Reduction


Sets the machine to reduce the size of a received fax if it is too large to print on a single sheet of paper.


Note that the machine only reduces the size down to 74%. If further reduction is required to fit the fax on a single sheet, it will be printed on separate sheets without being reduced.


Default: [On]

Not advisable with most industries where they want legal sized faxes printed on legal paper. That includes medical, legal, oil field construction, education and government. But that is beside the point. Your answer has nothing to do with faxes not being printed.

Oh by the way, I have been working on fax since Group 1 was the standard. That was 6 minutes a page or 4 minutes compressed. Not all makes and models supported compression.

[bsm2]

Re: MPC3503 won't print out faxes

Not advisable with most industries where they want legal sized faxes printed on legal paper. That includes medical, legal, oil field construction, education and government. But that is beside the point. Your answer has nothing to do with faxes not being printed.

Oh by the way, I have been working on fax since Group 1 was the standard. That was 6 minutes a page or 4 minutes compressed. Not all makes and models supported compression.

Hilarious Oh by the way as most companies don't even use legal size paper any more
Bravo AH Since I've worked for two of the largest Copy company's in the World we ALWAYS set Faxes to Auto Reduce ON SETUP



Print Received File


Sets the machine to automatically print the faxes received into memory or store them for later manual printing.


This setting appears only for the Type 2 model.


Default: [On]


On


Automatically print out the received faxes and delete from memory.


Off


Store the received faxes in memory for manual printing.

[withnail]

Re: MPC3503 won't print out faxes

User Switch
SW11 Auto reduce should be ON it's set to off

I changed Auto reduce to off when I returned for the reports to see if it changed anything which it didn't.

[bsm2]

Re: MPC3503 won't print out faxes

I changed Auto reduce to off when I returned for the reports to see if it changed anything which it didn't.

Did you check this setting
Print Received File




Sets the machine to automatically print the faxes received into memory or store them for later manual printing.




This setting appears only for the Type 2 model.




Default: [On]




On




Automatically print out the received faxes and delete from memory.




Off




Store the received faxes in memory for manual printing.

[withnail]

Re: MPC3503 won't print out faxes

Did you check this setting
Print Received File




Sets the machine to automatically print the faxes received into memory or store them for later manual printing.




This setting appears only for the Type 2 model.




Default: [On]




On




Automatically print out the received faxes and delete from memory.




Off




Store the received faxes in memory for manual printing.

I take it you mean Reception File Settings/Print turned on? Yes this is set to on with forwarding and store set to off. Locked Reception file is also turned off on the same page

[bsm2]

Re: MPC3503 won't print out faxes

I take it you mean Reception File Settings/Print turned on? Yes this is set to on with forwarding and store set to off. Locked Reception file is also turned off on the same page

What happens it you turn fax forward on does it send the file?