Mpc 2003 not able to load web browser

[copier tech]

Re: Mpc 2003 not able to load web browser

I tried. Chrome, internet explorer and Firefox, I also did the web interface firmware

This is your issue you skipped all the other firmware.

[heeks]

Re: Mpc 2003 not able to load web browser

Did you try to delete and re-create an https certificate ?I had this behaviour once and it worked fine after this trick.

[mga]

Re: Mpc 2003 not able to load web browser

Not true. Apple has included generic PCL support for years.

Add printer -> IP and chose: LPD on protocol, set the ip address, in the queue field you can write anything. In the print using field chose Generic PCL Driver. and it is done.

Depending on the age of your Mac you might be only able to print B/W.

News to me printing from mac to mpc2003 without ps3 are you sure I will investigate

[slimslob]

Re: Mpc 2003 not able to load web browser

News to me printing from mac to mpc2003 without ps3 are you sure I will investigate

I believe that the color 03s is where Ricoh introduced their own PostScript emulation. It is part of PDF Direct. Just like the emulation that HP uses it does allow printing from Mac but not all PS3 features are available.

[copier tech]

Re: Mpc 2003 not able to load web browser

I believe that the color 03s is where Ricoh introduced their own PostScript emulation. It is part of PDF Direct. Just like the emulation that HP uses it does allow printing from Mac but not all PS3 features are available.

No, the PS emulation was on the xx04 & later models.

[Gary k]

Re: Mpc 2003 not able to load web browser

Have you tried from your laptop or another computer? might be worth a try.

[StephenB]

Re: Mpc 2003 not able to load web browser

I'm just sharing where I had a C3503 do the same thing, WIM blocked and would NOT connect.

I executed SP 5801-10, 20, 25 This has worked twice for me.

Also try...

Check SP 5828-091 =1

Also, In user tools System / Interface settings / Permit SSL/TLS communication is set to cypher text /Clear Text.... Then reboot



Good luck

[mga]

Re: Mpc 2003 not able to load web browser

I believe that the color 03s is where Ricoh introduced their own PostScript emulation. It is part of PDF Direct. Just like the emulation that HP uses it does allow printing from Mac but not all PS3 features are available.

Yes can only print via airprint missing loads of fonts missing not much use when using mac it's OK for a iPhone or ipad.

[DRichard]

Re: Mpc 2003 not able to load web browser

Yes can only print via airprint missing loads of fonts missing not much use when using mac it's OK for a iPhone or ipad.

+1 on this. Whenever we know the customer is going to be using Macs, we ALWAYS recommend they purchase the optional PostScript and not rely on the emulation version. We occasionally have to follow up with them afterwards if they wouldn't go with it at the outset and found the emulation to be too little or if they later added Mac users to their staff.

[DH1980]

Re: Mpc 2003 not able to load web browser

I had a machine that would not load WIM and it was the antivirus software. Turned it off and it worked fine.