MP 6001SP WEB MOTOR

[anothertech]

Re: MP 6001SP WEB MOTOR

Here's a bulletin regarding the harness.

Harness Tube.pdf

[luca72]

Re: MP 6001SP WEB MOTOR

I have a web motor running continuously, since i switch on the machine.
Harness has been checked and it is not grounded somewhere, so i think
it is the BICU failed. Does anyone came across this failure?
By the way, i would like to ask where are the Schematics, part of Service
Manual located? I am having access to My Ricoh site but i cannot find it, nowhere!!
Thans in advance for any help...

usually it is the cable that has "scratched" on the metal frame, but if you are sure it is not, it could also be an internal short, try dipping it in a plastic cup full of alcohol, and leave it for an hour, then it blows well from the holes with compressed air, when it stops (sc540) I usually do this and it works, no it is said that it can help even if you always turn (?) it costs a fortune that scooter, it reminds me of the one of polistil toy cars

[Polo-022]

Re: MP 6001SP WEB MOTOR

[ATTACH]49024[/ATTACH]

Motor M13

section F4

Wires go to BCU CN203 pins B1 and B2

Is there anything else?

Professional Post!!!!!

[Polo-022]

Re: MP 6001SP WEB MOTOR

Have you tried updating the firmware?

Thanks, i'll give it a try!