MPC307 SC102

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • GeorgeBest
    Senior Tech

    500+ Posts
    • Jul 2009
    • 517
    #1

    MPC307 SC102

    Hi

    this C307 is given an SC102 after printing out the counter . .
    before that I had to replace the toner ID sensor board because one of the toners did not recognized
    Hell of a job, but eventually it worked, I thought, now getting this SC102 !!

    Copy lamp is blinking, checked the connectors over and over again . . .

    Anyone, help is appreciated

    gr George
    Tags: None
    • dalewb74
      Service Manager

      Site Contributor
      1,000+ Posts
      • Feb 2018
      • 1125
      #2
      what have you do so far to fix it? firmware? re-checked all your connections while replacing the ID sensor? if it occurred after you replaced the sensor then the problem is the........
        👍 2

        Comment

        • GeorgeBest
          Senior Tech

          500+ Posts
          • Jul 2009
          • 517
          #3
          I have re checked all my connection yes, strange that the first print after replacing the ID board was good, and then immediately it went to SC102. .
          Firmware not updated, can do that . . .

            Comment

            • luca72
              Field Supervisor

              1,000+ Posts
              • Oct 2017
              • 1709
              #4
              Originally posted by GeorgeBest
              Hi

              this C307 is given an SC102 after printing out the counter . .
              before that I had to replace the toner ID sensor board because one of the toners did not recognized
              Hell of a job, but eventually it worked, I thought, now getting this SC102 !!

              Copy lamp is blinking, checked the connectors over and over again . . .

              Anyone, help is appreciated

              gr George
              try starting from the simplest things:

              1) upgrade the firmware

              2) reseat the flat-cables

              3) *try to clean well the led array and the little ccd mirrors hiddens in the carriage, the disassembly to get there is a bit boring, but it can also be done easily by the customer.

              *the dirty mirrors, can lower the brightness of the array-led, generating the sc error
              "loneliness is an invention of the white man, when we are alone we talk to everything around us, we are never alone" (Ojibwa)
                👍 2

                Comment

                • slimslob
                  Retired

                  Site Contributor
                  25,000+ Posts
                  • May 2013
                  • 37047
                  #5
                  Originally posted by dalewb74
                  what have you do so far to fix it? firmware? re-checked all your connections while replacing the ID sensor? if it occurred after you replaced the sensor then the problem is the........
                  First thing I would do is get out my service manual and go to the trouble shooting for SC102-00 LED intensity adjustment error.
                    👍 4

                    Comment

                    • dalewb74
                      Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Feb 2018
                      • 1125
                      #6
                      Originally posted by slimslob
                      First thing I would do is get out my service manual and go to the trouble shooting for SC102-00 LED intensity adjustment error.
                      yeah that's exactly what i saw when i looked at my service manual as well. when i looked it up, i was looking for a sc102-xx. because usually it has a couple more digits on the end. but i only saw the 102-00 so i went with that.
                        👍 2

                        Comment

                        • GeorgeBest
                          Senior Tech

                          500+ Posts
                          • Jul 2009
                          • 517
                          #7
                          rechecked all connectors and FC, especially from the scanner assembley, it worked eventually, so probably there was a bad connection somewhere....
                          Thanks for the reply's !
                          gr G
                            👍 2
                            😀 1

                            Comment

                            Previous template Next
                            Working...