If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Would someone tell me what is the life count of the Drum, developer and Fuser for this model? Thank you.
Drum / Dev - 160K
Fusing sleeve unit /Pressure roller - 320K (machine will stop at 350K)
(BTW...It's in the Service manual, which you will need for setting/ resetting SP's, etc.)
Drum / Dev - 160K
Fusing sleeve unit /Pressure roller - 320K (machine will stop at 350K)
(BTW...It's in the Service manual, which you will need for setting/ resetting SP's, etc.)
Thank you for the info. I work for KM authorized dealer so I have no access to Ricoh.
Thank you for the info. I work for KM authorized dealer so I have no access to Ricoh.
If you are looking at replacing the drum/Dev or fuser remember with Ricoh we rebuild these units (this works out a lot cheaper) unlike Konica Minolta where we simply fit a complete unit.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
Comment