ri2000 garment

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • mga
    replied
    Re: ri2000 garment

    Originally posted by en.
    hi all

    HAVE AGOOD DAY ...

    I HAVE GARMENT PRINTER DTG RI2000 >>>ITS GIVE THIS ERROR MESSAEGE (( FATEL ERROR OCCURRED : REPOOT THE PRINTER AFTER REMOVE OBSTACLE ON TABLE PATH)
    ERROR CODE : PF MOTOR ERROR >>
    WHATE IT MEAN (PF MOTOR )??
    I checked the path of the table...there is no obstacle in the path of the table

    CAN YOU HELP ME PLEASE TO SLVE THIS PROBLEM

    i checke motor and its working fine >>and all connection is good >>and i replaced the sub-control board with anew one but its not solved the error
    These are not very popular t shirt printers I don't know any engineers that works for ricoh I know someone who has the ri3000 and been waiting 2 weeks for ricoh direct engineer I think it's a very small Dept

    Leave a comment:


  • slimslob
    replied
    Re: ri2000 garment

    Originally posted by copier tech
    Still the wrong forum. It is a printer. It should have been in the Ricoh Fax & Printer forum.

    Leave a comment:


  • copier tech
    replied
    Re: ri2000 garment

    Originally posted by anothertech
    I'm thinking wrong forum!
    Nope, Ricoh make this model!

    Ri 2000 Direct to Garment Printer | Ricoh Europe

    Leave a comment:


  • en.
    replied
    Re: ri2000 garment

    Originally posted by anothertech
    I'm thinking wrong forum!
    what do you mean ?

    Leave a comment:


  • anothertech
    replied
    Re: ri2000 garment

    I'm thinking wrong forum!

    Leave a comment:


  • en.
    started a topic ri2000 garment

    ri2000 garment

    hi all

    HAVE AGOOD DAY ...

    I HAVE GARMENT PRINTER DTG RI2000 >>>ITS GIVE THIS ERROR MESSAEGE (( FATEL ERROR OCCURRED : REPOOT THE PRINTER AFTER REMOVE OBSTACLE ON TABLE PATH)
    ERROR CODE : PF MOTOR ERROR >>
    WHATE IT MEAN (PF MOTOR )??
    I checked the path of the table...there is no obstacle in the path of the table

    CAN YOU HELP ME PLEASE TO SLVE THIS PROBLEM

    i checke motor and its working fine >>and all connection is good >>and i replaced the sub-control board with anew one but its not solved the error
Working...