Ricoh mpc 2003 Toner issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Maged_elagamy
    replied
    Re: Ricoh mpc 2003 Toner issue

    Originally posted by JunorTech
    I replaced a new toner with mpc2003. but after two days toner was empty and all the toner drained to the waste bin. please give me an idea of what was happening there.
    are u sure the toner drained to the waste or just a conclusion ?
    Genuine toner or compatible ?
    what is the condition of development unit ? and TD sensor ?

    Leave a comment:


  • Gift
    replied
    Re: Ricoh mpc 2003 Toner issue

    I think that the toner hopper issue did the opposite problem IIRC (toner end error with full bottles). Pretty odd problem here, especially if the print looks OK. I'd also recommend checking the PM parts and compare all voltages/TD settings/coverage informations with the other colors, perhaps something stands out.

    Leave a comment:


  • copier tech
    replied
    Re: Ricoh mpc 2003 Toner issue

    Originally posted by JunorTech
    I replaced a new toner with mpc2003. but after two days toner was empty and all the toner drained to the waste bin. please give me an idea of what was happening there.

    Are you using genuine Ricoh toner? Any drums/devs over PM life?

    There is a known is with the toner hoppers on this model

    Leave a comment:


  • Drivee
    replied
    Re: Ricoh mpc 2003 Toner issue

    Maybe just bad toner sensor. Toners are 9.5k!

    Leave a comment:


  • luca72
    replied
    Re: Ricoh mpc 2003 Toner issue

    Originally posted by JunorTech
    I replaced a new toner with mpc2003. but after two days toner was empty and all the toner drained to the waste bin. please give me an idea of what was happening there.

    I can't believe it, two days is really too long! ... Isn't it that the customer has 2003 more, and someone was in a hurry to print, and swapped the full bottle for the empty one?...its happen to me, a couple of times.

    Leave a comment:


  • slimslob
    replied
    Re: Ricoh mpc 2003 Toner issue

    First off the toner bottles for C2003 only has roughly half the expected yield of the C3503 toner, 9500 vs 18,000 color and 15,000 vs 29,500 for Black. That is because the target monthly volume is half that of the C3003. You aren't over working that C2003 are you? Also check how frequently the C2003 runs process control as that does use toner to apply the ID patches to the ITB and since that toner goes straight to the waste toner when the drums and ITB are cleaned. Final possibility is a bad toner density sensor on the development unit.

    Leave a comment:


  • JunorTech
    started a topic Ricoh mpc 2003 Toner issue

    Ricoh mpc 2003 Toner issue

    I replaced a new toner with mpc2003. but after two days toner was empty and all the toner drained to the waste bin. please give me an idea of what was happening there.
Working...