MP2555 Doc Feeder compatibility question

[copyaction]

Does anyone know if the MP2555SP doc feeder D3B0 can be replaced with the lower profile D779 feeder?

[slimslob]

What does the Product Support Guide say?

[copyaction]

What does the Product Support Guide say?

I’m afraid I don’t have that. I can do the swap but I just don’t want to do it and mess anything up if they are not compatible.

[anothertech]

I'd say the odds are very low, don't try it.

[slimslob]

I’m afraid I don’t have that. I can do the swap but I just don’t want to do it and mess anything up if they are not compatible.

Then do you at least have the Service Manual?

[copyaction]

Then do you at least have the Service Manual?

Yes I have parts and service manuals and I’ve been working on this series since the MP2554 was released.

[slimslob]

Yes I have parts and service manuals and I’ve been working on this series since the MP2554 was released.

Then you already have the answer. Look at.

1.Product Information
External Options for MP2555/MP3055/MP3555 (mainly North America)

Page 20 in my copy

You would have saved time if you had used the service product codes, DF3090 and DF3100 instead of the sales order codes. Initially I had just scanned the installation instructions which listed the DF models. Order codes are listed in Product Information so that you can advise lazy sales people that do not know how or think their time id to valuable to configure machines.

[copyaction]

Then you already have the answer. Look at.

1.Product Information
External Options for MP2555/MP3055/MP3555 (mainly North America)

Page 20 in my copy.

Thank you sir.

[luca72]

Does anyone know if the MP2555SP doc feeder D3B0 can be replaced with the lower profile D779 feeder?

yes, of course, I did it a little while ago, you just have to change the cable (it's shorter) and one of the two big screws that hold the RDF on the machine.

[Popolopo]

MP2555 can use DF3090 and DF3100. But not sure whether need to change IPU for SPDF.

[MIKON]

Yes
psg lists both

[copyaction]

Thanks everyone for the information, the swap was easy and worked with no problems.