MP C3003 Auto Color Calibration

[aAandy]

hello everyone

i am refurbing a machine for a client and upon attempting to perform Auto Color Calibration i get the following message

"You do not have the privileges to use this function"

i notice there is a login option when User Tools is entered, but there is no way to get the login info as the machine was bought used at auction

is there any way to disable admin login in SP mode?

thanks in advance

Andy

[8T2]

Re: MP C3003 Auto Color Calibration

I would check the admin settings in WIM and disable it from there. If I recall correctly it's Machine Admin that needs to be disabled

Sent from my SM-A305F using Tapatalk

[slimslob]

Re: MP C3003 Auto Color Calibration

Normal SP NO. You have to be logged in to either User Tools or WIM as the administrator. Try admin with no password, that is the default. If that doesn't work then try supervisor with no password. Supervisor can do one thing and one thing only, change the administrator credentials. If you know how to enter Factory SP then SP 5846-046 will reset the both to default, no password.

[aAandy]

Re: MP C3003 Auto Color Calibration

I would check the admin settings in WIM and disable it from there. If I recall correctly it's Machine Admin that needs to be disabled

Sent from my SM-A305F using Tapatalk

thanks for the response, i forgot to mention the machine is in a shed with no network

[aAandy]

Re: MP C3003 Auto Color Calibration

Normal SP NO. You have to be logged in to either User Tools or WIM as the administrator. Try admin with no password, that is the default. If that doesn't work then try supervisor with no password. Supervisor can do one thing and one thing only, change the administrator credentials. If you know how to enter Factory SP then SP 5846-046 will reset the both to default, no password.

thanks for the response!

i've not used factory SP on machines with the 806182 SP entry, is it the same as for the machines with 107 SP entry?

[slimslob]

Re: MP C3003 Auto Color Calibration

thanks for the response!

i've not used factory SP on machines with the 806182 SP entry, is it the same as for the machines with 107 SP entry?

Yes, Factory mode has not been change.

[aAandy]

Re: MP C3003 Auto Color Calibration

Yes, Factory mode has not been change.

thank you Slim, much appreciated

[luca72]

Re: MP C3003 Auto Color Calibration

hello everyone

i am refurbing a machine for a client and upon attempting to perform Auto Color Calibration i get the following message

"You do not have the privileges to use this function"

i notice there is a login option when User Tools is entered, but there is no way to get the login info as the machine was bought used at auction

is there any way to disable admin login in SP mode?

thanks in advance

Andy

as slimslob says, log in as supervisor, and expire all admin passwords

[copier tech]

Re: MP C3003 Auto Color Calibration

hello everyone

i am refurbing a machine for a client and upon attempting to perform Auto Color Calibration i get the following message

"You do not have the privileges to use this function"

i notice there is a login option when User Tools is entered, but there is no way to get the login info as the machine was bought used at auction

is there any way to disable admin login in SP mode?

thanks in advance

Andy

Have you tried the default log in?

admin & password blank.