ricoh c5100 pro code SC442

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • leonardcahill
    Technician
    • Nov 2019
    • 23
    #1

    [Error Code] ricoh c5100 pro code SC442

    Running lots of labels and the machine blew a code SC442. Any suggestions. Seems the lift tray at the feeder goes down and skips gears, then blows the code. Help! Thankyou
    Tags: code, feeder, left, ricoh c5100, sc442
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 37393
      #2
      Re: ricoh c5100 pro code SC442

      And the service manual says, ITB lift sensor YMC. Detects whether or not the YMC transfer rollers are in the lifted position.

        Comment

        • dalewb74
          Service Manager

          Site Contributor
          1,000+ Posts
          • Feb 2018
          • 1135
          #3
          Re: ricoh c5100 pro code SC442

          i searched for the error in the service manual. it went right to the 442 code..

            Comment

            • anothertech
              Service Manager

              Site Contributor
              1,000+ Posts
              • Nov 2007
              • 1762
              #4
              Re: ricoh c5100 pro code SC442

              Check this out, possible solution?

              SC442.pdf

                Comment

                • mrwho
                  Major Asshole!

                  Site Contributor
                  2,500+ Posts
                  • Apr 2009
                  • 4299
                  #5
                  Re: ricoh c5100 pro code SC442

                  Originally posted by anothertech
                  Check this out, possible solution?

                  [ATTACH]54324[/ATTACH]
                  x2. Had that same situation once. Definitely check the motor @ the back of the machine.
                  ' "But the salesman said . . ." The salesman's an asshole!'
                  Mascan42

                  'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
                  Ibid

                  I'm just an ex-tech lurking around and spreading disinformation!

                    Comment

                    • leonardcahill
                      Technician
                      • Nov 2019
                      • 23
                      #6
                      Re: ricoh c5100 pro code SC442

                      Replaced the motor in the back, it self destructed. New Code 398-04 and 540 has now emerged. Any takers. Thanks guys

                        Comment

                        • slimslob
                          Retired

                          Site Contributor
                          25,000+ Posts
                          • May 2013
                          • 37393
                          #7
                          Re: ricoh c5100 pro code SC442

                          Originally posted by leonardcahill
                          Replaced the motor in the back, it self destructed. New Code 398-04 and 540 has now emerged. Any takers. Thanks guys
                          Do you even have a service manual? If you don't, you should not be working. Both of those codes are in the service manual to include which 2 motors they refer to.

                            Comment

                            • leonardcahill
                              Technician
                              • Nov 2019
                              • 23
                              #8
                              Re: ricoh c5100 pro code SC442

                              Originally posted by slimslob
                              Do you even have a service manual? If you don't, you should not be working. Both of those codes are in the service manual to include which 2 motors they refer to.
                              The manual that we have doesn't have this procedure in it. Got a link? Manual? Advice . Thanks

                                Comment

                                • leonardcahill
                                  Technician
                                  • Nov 2019
                                  • 23
                                  #9
                                  Re: ricoh c5100 pro code SC442

                                  [QUOTE=mrwho;2190360]x2. Had that same situation once. Definitely check the motor @ the back of the machine.

                                  See below: followed the bulletin and replace the motor with one from a spare / parts machine. Now we have new codes. FML

                                    Comment

                                    • slimslob
                                      Retired

                                      Site Contributor
                                      25,000+ Posts
                                      • May 2013
                                      • 37393
                                      #10
                                      Re: ricoh c5100 pro code SC442

                                      Originally posted by leonardcahill
                                      The manual that we have doesn't have this procedure in it. Got a link? Manual? Advice . Thanks
                                      Where did you get it, from a Cracker Jacks box. I have the a copy of the original printing and both error codes are listed. OBTW they are not a procedure, they are error code listings.

                                        Comment

                                        • leonardcahill
                                          Technician
                                          • Nov 2019
                                          • 23
                                          #11
                                          Re: ricoh c5100 pro code SC442

                                          Motor replaced, all codes cleared now. Back in business. Thanks so much for the help guys. You all Rock!!!

                                            Comment

                                            Previous template Next
                                            Working...