Ricoh Pro 5210s Question

[David P]

I am printing directly to my Ricoh Pro 5210s (not to a Fiery). When I try to print more than 1 copy, it still only prints out 1 copy. If I try to make 2 copies or 200 copies, it still only prints 1. Thanks in advance!!!!

[GIUBOSS]

Re: Ricoh Pro 5210s Question

I am printing directly to my Ricoh Pro 5210s (not to a Fiery). When I try to print more than 1 copy, it still only prints out 1 copy. If I try to make 2 copies or 200 copies, it still only prints 1. Thanks in advance!!!!

If you are referring to copier mode, check your copier settings - there should be an entry for the maximum number of copies that can be made to be set to 999 rather than 1, sorry, I read the post again and it refers to printing, then try reinstalling the driver and setting the IP port, or do a test with a laptop by connecting it only to it

[slimslob]

Re: Ricoh Pro 5210s Question

In the driver settings make sure the job type is not set to "sample print "

[TonerMunkeh]

Re: Ricoh Pro 5210s Question

Two things - make sure the media settings you are sending to the machine match what are on it, also of the machine doesn't have a finisher ensure User Tools / Printer Features / System tab "Rotate Sort - Auto Paper Continue" is set "ON".

[David P]

Re: Ricoh Pro 5210s Question

If you are referring to copier mode, check your copier settings - there should be an entry for the maximum number of copies that can be made to be set to 999 rather than 1, sorry, I read the post again and it refers to printing, then try reinstalling the driver and setting the IP port, or do a test with a laptop by connecting it only to it

Your post helped me down the right path. Reinstalled the latest driver. Went into the Printer Preference / Finishing Tab / then changed from "Collate" to "Application". Now everything is working fine. Thank You!!!

[GIUBOSS]

Re: Ricoh Pro 5210s Question

Well, good work!!

[Larhal]

Re: Ricoh Pro 5210s Question

Well, good work!!

+1