Face up Print/Scan

[Guest]

Dear All,
The Above Subject is Face up Print and Copy from ADF
I have Nashuatec MP C 7500 machines in total 30.By dafault Print and Copy from ADF is face down, I want to change this default setting to face up. Please help me..

[Jomama46]

UT>Copier settings> input/output>copy eject face method from glass (or something like that). Also one from Bypass

[Jomama46]

BTW, the reason it is face down is so sorted copies will be in the correct order.

[KenB]

Not to mention that the staple would be in the wrong position if you print face up.

[farid]

Dear All,
The same thing copy eject face up i need from by pass and all print job.

[Jomama46]

call a tech, you need a new skatafritz

[farid]

hi

[QUOTE=Jomama46;160691]call a tech, you need a new skatafritz[/QUOTE

what is skatafritz.pls tell me in details.
I am a tech.

[farid]

i do not need sort please tell me how to make changes default.

[Jomama46]

From the operator manual. UT>Copier settings> input/output>copy eject face method from glas. You cant change the ADF method.

[delosangeles]

Allow me to spoon feed

From the operator manual. UT>Copier settings> input/output>copy eject face method from glas. You cant change the ADF method.

On the display on the upper left hand there is a real botton that has printed on it 'User tools / Counter" press that botton.

The touch screen will change and you will see soft keys. Touch the one that says "Copier settings"

The display will change once again and you will see several tabs, select the "Input/output" tab and you should see the setting for copy eject.

Easy huh?