Ricoh Aficio 1515 Ghosting

[iscott]

Gosting image is occuring in the fuser pressure roller has been replaced springs are on correctly toner is ricoh brand.

About ready to trash it. Or just replace the whole fuser.......

If this makes any difference it is really a Savin 3515.....

[CT Copier Repair]

is the image on the paper? Or on the roller? if on the paper then its a cleaning problem. If coming from the roller then its a toner or fuser problem. Try a different image unit is it still there?

[iscott]

Sorry The PC Unit is brand new and the gosting occurs in the fuser not at the PC U.
Also I miss Spoke the heat roller is the part that was just replaced

[ricoco]

Gosting image is occuring in the fuser pressure roller has been replaced springs are on correctly toner is ricoh brand.

About ready to trash it. Or just replace the whole fuser.......

If this makes any difference it is really a Savin 3515.....

What is the temperature in the fuser?
See the SP 1106-1.
You also can change the temperature on the SP 1105-1 and 1105-5.

[mongo59]

If the humity is high, bumping the fuser temp 5 degrees will some time fix it. Don't go higher than that or you will be resetting fuser codes.

Mongo

[halac0ax]

Have you tried a different hot roller?

[halac0ax]

I just read your other post.. Try a different transfer roller

[BLADE]

check if there is a pressure release mechanism not working if the fuser was rebuilt

[rthonpm]

Check the bushings for the pressure roller, as well as the pressure roller itself. In my experience, the press rollers in these don't always show visible issues, but a new one should do the trick.

[jonezy999]

Pressure roller bushings x100.

[anthony123]

So,,,, What was the fix ????

[Blazer1087]

Is the hot roller OEM? we have had problems with aftermarket rollers on this model.

[ZeusGT]

Pressure roller bushings... Make sure the frame of the fuser is not broken as well.

[stan780953]

If you have only replaced the Hot roller I would also fit a pressure roller. This I think will 99% fix your ghosting.

[Venom]

I agree, up the fuser temp