Aficio 1035 developer unit rebuilding

[muaazgujjar]

I am trying to rebuild a developer unit of Aficio 1035. Magnetic roller has been parted from Doctor blade.Would anysenior one be advise the exact or minimum gap between Mag roller & doctor blade to maintain a resonable size of brush on the mag roller.

[Jomama46]

Its factory set. You're not supposed to take it apart. Get a new one.

[muaazgujjar]

Aficio 1035

Thanking you sir,
Many mistakes could be done.However one of my friend advised us to put 8 papers of 80gsm between roller and doctor blade and adjust the gap.The trick woked fine for me.I am of the view that its just a trick paper can be of different thickness (bulky or fine).
But as you advised one must not deal with some factory setted parts in any of the units.

[Lagonda]

If the screw head has white paint on it, leave it alone!

[ccchuah]

Why not you take other development unit of 1035, measure with the gauge and solve the problem youself ?

[Gift]

Try 3 or 4 sheets standard copy paper between the mag roller and doctor gap (I'd go with 3 sheets and if the blacks looks pale you can still increase the gap) - there's no need for a new unit if nothing else is broken.

[nmfaxman]

Tight .35 mm.