Ricoh Aficio 700 ADF Problem

[powshar]

We have had problems w/minute cracking w/One Way Bearing Drive, which we've fixed by prying the one way bearing loose and sliding it back on with glue.

Our question is : The paper is past the stop position and is fairly consistent inn shooting the original to the floor.

Any ideas?

Thanks

[Herrmann]

Re: Ricoh Aficio 700 ADF Problem

Just for me to understand this right:
You reinstalled a One-Way Bearing by glueing it in Place and wonders, why it does not work anymore

[Jomama46]

Re: Ricoh Aficio 700 ADF Problem

To the floor?
Which one way?
Why are you "repairing" a one way. Replace it. If the problem persists, replace the shaft it spins on.

[teebee1234]

Re: Ricoh Aficio 700 ADF Problem

Are you talking about the white torque limiter that connects to the separation roller? If so, then yes I guess it would kick the originals backwards if you glued it. It's meant to slip under high friction (1 sheet of paper) and drive back under low friction (2 or more sheets). If it's glued it will always drive in reverse to paper feed, which is not what you want - replace it (and the shaft if you mucked it up with glue).

Not to be rude, but if this is the case then you really shouldn't be working on something if you don't know how it functions. If we're misunderstanding what you're trying to describe, my apologies and please respond with more details.

[JustManuals]

Re: Ricoh Aficio 700 ADF Problem

This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

Paul@justmanuals.com