Hello fellow Copytechnet!
I have a normal Konica c454 Sliding panel and the panel flat is bad and showing a white screen and C-D411....
88 results in 0.0262 seconds.
-
Sliding panel with white display and error C-D411 Bizhub C454
-
How to remove Sliding Platen on Canon PC1080F
I need to remove the sliding portion of the PC1080F to get to the fuser but can't figure out how and don't have a manual handy. Can anyone help with ... -
Doc 250 IBT belt won't stay center
Meter count 218K black + white, had 042-326, checkpoints hit edoc (clean IBT sensor, silver strip, re-center, belt edge adjust - failure) so then removed... -
canon cassette broken guide gear bins on base
There was a fix found at alpha dealer solutions that is now out of business. This fix (a metal plate) that fixes both bins on the base at the same time... -
xerox 510 lines
Need some help working on a xerox 510 that has straight black thin lines some are faint others are dark.
Replace Drum, Cleaning kit, tranfer roll... -
Ricoh tech need help on old Canon NP6030
Paper Jams out of tray 2 with new feed tires. It picks up the paper and goes in about 4 or 5 inches then stops. I know
on a Ricoh if the tray is... -
Kyocera KM3530
Hey guys, I just replaced the paper lift clutch on the bottom cassette in my customers KM3530 thinking that the broken clutch was the problem, but the... -
C451 Won't Add Yellow Toner
I have a KM C451 that won't add yellow toner, so far have replaced MC board and sub hopper assembly. I know toner add to sub hopper is working because... -
Ricoh Aficio SP c811dn - myriad of "replace", "insert", "low" errors, stumped techs
Well, I've got a head-scratcher - hopefully! Hopefully, rather, the generous and oft-underappreciated techs browsing this board enjoy a good head-scratcher......Last edited by FalconFour; 08-10-2011, 04:10 AM. Reason: removed unwanted formatting added by WYSIWYG -
Ricoh Aficio 700 ADF Problem
We have had problems w/minute cracking w/One Way Bearing Drive, which we've fixed by prying the one way bearing loose and sliding it back on with glue.... -
TA 3050ci Blurred Copies
Ok Here we go TA 3050ci is giving me blurred copies. Rear is not as bad as front,rear is just noticeable,
front is very noticeable.Printing...
-
MPC 2050 sc742
Gday all,
Just wondering what some of you guys are doing to overcome this sc742 error, relating to the jogger in the internal finisher? It seems... -
C65hc - density to low
With C65hc we reach only those D-max values:
C 0.88 / M 1.19 / 0.89 Y / K 1.94
My opinion, all values except black far too low.... -
Need cassette tray for iR3045
The little plastic post molded into the tray is broken and, as a result, the side-to-side paper guides drift.
But I can't find a part number... -
clc 4000
can any one give me instructions how to replace drum cleaning blade for clc 4000
thanks
