Poor Copy quality On MP C6000

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Max
    replied
    Re: Poor Copy quality On MP C6000

    Just bin this thing.

    Leave a comment:


  • Hankster
    replied
    Re: Poor Copy quality On MP C6000

    Welcome to the world of ricoh!!


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • anothertech
    replied
    Re: Poor Copy quality On MP C6000

    Originally posted by Cipher
    Intermittent blurs on K like seen in you sample can be caused by condensation build up on the drum surface.

    Check the air flow inlets and exits, vac / clean all the filters as they do get clogged up quickly on this range.

    The OP says it's on color as well, if that's true then I'd be looking at the ITB area or jitter along the paper path.

    Leave a comment:


  • Cipher
    replied
    Re: Poor Copy quality On MP C6000

    Intermittent blurs on K like seen in you sample can be caused by condensation build up on the drum surface.

    Check the air flow inlets and exits, vac / clean all the filters as they do get clogged up quickly on this range.

    Leave a comment:


  • Zaxxon
    replied
    Re: Poor Copy quality On MP C6000

    Originally posted by spgnet
    Color also...not only left side ..some time other side
    look at the PTR sektion, it can easily be assembled or mounted incorrect.

    aaaaand follow the PM counters or this machine will kick your ass (probably will anyway).
    Last edited by Zaxxon; 02-08-2015, 06:38 PM.

    Leave a comment:


  • spgnet
    replied
    Re: Poor Copy quality On MP C6000

    Originally posted by Zaxxon
    is it the black color only?
    Color also...not only left side ..some time other side

    Leave a comment:


  • bob marley
    replied
    Re: Poor Copy quality On MP C6000

    Originally posted by slimslob
    If you are referring to left edge of the print, I would clean the laser shield glasses. If that does not correct the problem, replace the development unit.
    agree with u

    Leave a comment:


  • Zaxxon
    replied
    Re: Poor Copy quality On MP C6000

    Originally posted by spgnet
    Please advice poor copy quality on this MPC 6000 unit , which part need service
    [ATTACH=CONFIG]27934[/ATTACH]
    is it the black color only?

    Leave a comment:


  • Zaxxon
    replied
    Re: Poor Copy quality On MP C6000

    Originally posted by anothertech
    I wish I wasn't trained on it!
    Ha ha ha, me too

    Leave a comment:


  • slimslob
    replied
    Re: Poor Copy quality On MP C6000

    If you are referring to left edge of the print, I would clean the laser shield glasses. If that does not correct the problem, replace the development unit.

    Leave a comment:


  • anothertech
    replied
    Re: Poor Copy quality On MP C6000

    I wish I wasn't trained on it!

    Leave a comment:


  • Bantams
    replied
    Re: Poor Copy quality On MP C6000

    1 Have you been Trained on it?

    2 Why was you trained on it?

    3 run the other way

    Leave a comment:


  • spgnet
    started a topic [CQ] Poor Copy quality On MP C6000

    Poor Copy quality On MP C6000

    Please advice poor copy quality on this MPC 6000 unit , which part need service
    New Scan-20150207150448-00001.jpg
Working...