Can I put my ricoh MP6001 upgrade to MP7001 technology, anyone want?

[blackcat4866]

Re: Can I put my ricoh MP6001 upgrade to MP7001 technology, anyone want?

First off they operate at different AC line voltages. The MP 7502 is an 110V NEMA-5-20 power connection. The MP 9002 is a 220V NEMA-6-20 power connection. Trying to slow the 9002 down could result in scorched copies.

I'm guessing is that was comedy, not any realistic expectation of changing the engine speed or AC supply voltage. =^..^=

[KenB]

Re: Can I put my ricoh MP6001 upgrade to MP7001 technology, anyone want?

That problem is caused by people living in places where things are very different and perhaps somewhat more desperate than they are around here.
I probably got to go on some humanitarian missions to Central America with the Reserves back in the '90s, which may give me a small view of how different things are in other places.

I totally agree with that.

I've never been beyond the U.S.or Canada, but I do know that in many parts of the world machines which we consider to be dinosaurs and totally extinct are considered to be new.

When you consider that along with the lack of support and economic conditions, it gets easier to appreciate the gap.

Then add in the language barriers. Heck, I work with a lot of techs remotely in some parts of the U.S. and communication can be a real challenge.

[anothertech]

Re: Can I put my ricoh MP6001 upgrade to MP7001 technology, anyone want?

What I want to do is convert my Mp9002's to a Mp7502 & stop jerking around with the dusting. I wonder if they would notice???

I seem to remember a post a while back about which jumper needs to be changed on a different model. Just never saw any need for it until now.

The 7502's run dirty, they have got to be cleaned out between dev. changes, are the 9002's worse?

[techsass]

Re: Can I put my ricoh MP6001 upgrade to MP7001 technology, anyone want?

Thank you Blackcat. Lord knows I've done enough installs where the sales rep failed to tell the customer that they need a 220v outlet.

[KenB]

Re: Can I put my ricoh MP6001 upgrade to MP7001 technology, anyone want?

Thank you Blackcat. Lord knows I've done enough installs where the sales rep failed to tell the customer that they need a 220v outlet.

Same here.

I can't even guess how many times we ended up paying the electrician's bill to install a new line.

I think it was normally removed from the salesrep's commission.

[zuojin168]

Re: Can I put my ricoh MP6001 upgrade to MP7001 technology, anyone want?

Yes, my English is not good, I am not English, I use translation software.My English is not good, please forgive!
6001 upgraded to 7001 do not need to jump line, just need to change the NVRAM, and can be upgraded with a firmware upgrade (speed becomes a minute after 70)
This is my study of MP5500 upgraded to MP7500 MP6000 upgraded to MP8000 upgrade method

[zuojin168]

Re: Can I put my ricoh MP6001 upgrade to MP7001 technology, anyone want?

200004ptkjap02f2lmnl9k.jpg200629egol1l3gg26l2o8i.jpg
MP6000 upgraded to MP8000 all their parts and circuit board is common.I unwrapped all machine, found only in the thread, I put this line two lines connect together can change the speed (MP6000 would become MP8000, speed can reach more than 75, of course)

[anothertech]

Re: Can I put my ricoh MP6001 upgrade to MP7001 technology, anyone want?

Yes, my English is not good, I am not English, I use translation software.My English is not good, please forgive!
6001 upgraded to 7001 do not need to jump line, just need to change the NVRAM, and can be upgraded with a firmware upgrade (speed becomes a minute after 70)
This is my study of MP5500 upgraded to MP7500 MP6000 upgraded to MP8000 upgrade method

Ok, is that how you do it in China?

The way we do it here is, if the customer wants a 70 cpm machine, we sell them an MP7001

BTW, I'm not English either.

[zuojin168]

Re: Can I put my ricoh MP6001 upgrade to MP7001 technology, anyone want?

Ok, is that how you do it in China?

The way we do it here is, if the customer wants a 70 cpm machine, we sell them an MP7001

BTW, I'm not English either.

Because I am in the United States imports of old machine MP6000 quantity many, and MP8000 machines are only a few units.If not MP8000 machine I will not sell, that can only be placed in the home the slowly become garbage.