Hi guys hope you are well,
currently got a printer, multixpress c9301 and it boots up loads one screen then just gets stuck on the next screen with the loading wheel, I’ve done quite a bit of research and tried a few things, such as resitting the panel on both ends but I’ve seen that maybe I need some media to fix this os that I don’t have access to.
Any help would be much appreciated, thank you very much.
currently got a printer, multixpress c9301 and it boots up loads one screen then just gets stuck on the next screen with the loading wheel, I’ve done quite a bit of research and tried a few things, such as resitting the panel on both ends but I’ve seen that maybe I need some media to fix this os that I don’t have access to.
Any help would be much appreciated, thank you very much.
Comment