Sharp MX4100n H5-01 after trouble cancel...

[Service@PRT]

Re: Sharp MX4100n H5-01 after trouble cancel...

You say there's no toner on the drums? Sounds to me like your shutter solenoid is not opening. How did you test to see if the shutters open all the way? Remove the black shutter temporarily and see if you get image.

i didnt say that there is no toner.. toners is new and Genuine, all of them... i will check about that shutter test when we got there today.

[Service@PRT]

Re: Sharp MX4100n H5-01 after trouble cancel...

You say there's no toner on the drums? Sounds to me like your shutter solenoid is not opening. How did you test to see if the shutters open all the way? Remove the black shutter temporarily and see if you get image.

Thanks.. it was the shutter.. in someway it is stuck and not opening.

Sent from my HUAWEI VNS-L21 using Tapatalk

[JLVisser]

Re: Sharp MX4100n H5-01 after trouble cancel...

Thanks.. it was the shutter.. in someway it is stuck and not opening.

Sent from my HUAWEI VNS-L21 using Tapatalk

There is a solenoid that opens the shutters. That solenoid is probably bad. You can test it with Sim 6-1, LSUSS.

[Service@PRT]

Re: Sharp MX4100n H5-01 after trouble cancel...

There is a solenoid that opens the shutters. That solenoid is probably bad. You can test it with Sim 6-1, LSUSS.

Yep checked that one... And its all good now. Thank you again.

Sent from my HUAWEI VNS-L21 using Tapatalk

[JLVisser]

Re: Sharp MX4100n H5-01 after trouble cancel...

Yep checked that one... And its all good now. Thank you again.

Sent from my HUAWEI VNS-L21 using Tapatalk

You're welcome!

[Phil B.]

Re: Sharp MX4100n H5-01 after trouble cancel...

No color nor black print out.. in either copy, print from sc or that comes from computer, so its totally blank pages that is coming out of the machine.

Sent from my HUAWEI VNS-L21 using Tapatalk

i'd clean the contacts for ALL colors on TBelt... if you do a stop print is there image on the drums?

[niceville318]

Re: Sharp MX4100n H5-01 after trouble cancel...

Have you tried updating or re-flashing the firmware?
You say you're getting blank pages. So the mfp is not jamming anymore or is it still printing blank pages and jamming at the POD1 sensor?

With this model I've had to disconnect the mother PWB and PCU PWB, reseat all connections for a similar problem. good luck

[Service@PRT]

Re: Sharp MX4100n H5-01 after trouble cancel...

Thanks guys.. it was the shutter who has a problem. The solenoid is bad enough for the shutter not to open. So i just changed the solenoid and all good.

Sent from my HUAWEI VNS-L21 using Tapatalk