ar-m450n L6-10

[DINGO]

Helo

Y have a ar-m450n that every mornings when swicth power on give me L6-10??
Y turn powr off and conect again and works well every day.

Can someone help me??

thanks

[blackcat4866]

The laser is failing. =^..^=

[tmaged]

The polygon motor is more than likely the culprit. Replace it or the entire laser unit to avoid other issues. The early serial numbers were a real pain to replace/repair. The later serials are relatively easy, especially without a FN-6. Hope that helps.

[DINGO]

RE

Tmaged

y'haved tested whit 61-1, and gives me ok??

y apreciate greatly yours help.

thanks

[tmaged]

The result is OK only because your problem is intermittent. If the Polygon motor fails completely, the result would be NG.

[DINGO]

RE

OK
y`m whith look because the problem only gives in morning in the first power on, but tmaged, y don`t urnderstand what you mean whith NG?
by

[tmaged]

LSU test 61-1 will either yield results of OK if the test is positive, or NG (no good) if the test fails. Your test results in OK as the LSU has not completely failed yet.

[DINGO]

re

Ok
y understand now.
thanks
stay weel