MX-3110N Faded Prints, Copies Good

[mioduz]

Re: MX-3110N Faded Prints, Copies Good

can you upload the file you are printing?

To be clear all color prints are severly faded
But this is the file I've been working with

https://i.imgur.com/gIbciT1.jpg

And before anyone asks I'm not using the paper in this picture if was just something bright I had laying around

[Phil B.]

Re: MX-3110N Faded Prints, Copies Good

To be clear all color prints are severly faded
But this is the file I've been working with

https://i.imgur.com/gIbciT1.jpg

And before anyone asks I'm not using the paper in this picture if was just something bright I had laying around

what is the PAPER type you have designated in the tray and the print driver?

high gloss paper needs a thick1 setting for the toner to bong to the page properly

[mioduz]

Re: MX-3110N Faded Prints, Copies Good

what is the PAPER type you have designated in the tray and the print driver?

high gloss paper needs a thick1 setting for the toner to bong to the page properly

Just cheap copy paper. What ever staples had on sale last. Tray setting to plain

[Phil B.]

Re: MX-3110N Faded Prints, Copies Good

Just cheap copy paper. What ever staples had on sale last. Tray setting to plain

So the pic ISN'T the paper being used?

Sent from my SM-G960U using Tapatalk

[mioduz]

Re: MX-3110N Faded Prints, Copies Good

So the pic ISN'T the paper being used?

Sent from my SM-G960U using Tapatalk

That is correct

[copiertec]

Re: MX-3110N Faded Prints, Copies Good

as mentioned above, restore factory defaults, then go from there.

[mioduz]

Re: MX-3110N Faded Prints, Copies Good

as mentioned above, restore factory defaults, then go from there.

I haven't been able to locate a "reset to default" option in the web page setup. Can you provide any.futhor guidance

[copiertec]

Re: MX-3110N Faded Prints, Copies Good

Access it from the control panel of the mfp and follow the steps provided.

[Phil B.]

Re: MX-3110N Faded Prints, Copies Good

as mentioned above, restore factory defaults, then go from there.

he's an end user .. this might cause more problems for us.

[mioduz]

Re: MX-3110N Faded Prints, Copies Good

Access it from the control panel of the mfp and follow the steps provided.

I used option:

67-17 Printer reset The set data related to the printer are initialized. (Including the NIC setting.)

to reset the printer. No change when printing a JPG from thumbdrive

[Phil B.]

Re: MX-3110N Faded Prints, Copies Good

I used option:

67-17 Printer reset The set data related to the printer are initialized. (Including the NIC setting.)

to reset the printer. No change when printing a JPG from thumbdrive

have you tried printing a PDF sometimes JPG's are screwy

[miller01123@gmail.com]

Re: MX-3110N Faded Prints, Copies Good

I haven't been able to locate a "reset to default" option in the web page setup. Can you provide any.futhor guidance

On the op-panel of the machine you should see a Settings button. That should get you started. The password should be "admin".

[mioduz]

Re: MX-3110N Faded Prints, Copies Good

have you tried printing a PDF sometimes JPG's are screwy

Since the begining of this project I have been using a pdf printer test file as well. cmyk shaded scales etc etc. Same faded result

[copiertec]

Re: MX-3110N Faded Prints, Copies Good

he's an end user .. this might cause more problems for us.

It's a harmless reset, just puts the mfp back to factory, it's not accessed by sim codes.

[mioduz]

Re: MX-3110N Faded Prints, Copies Good

It's a harmless reset, just puts the mfp back to factory, it's not accessed by sim codes.

I was not able to find this factory reset that you speak of