Sharp BP B540WR

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Reed
    Senior Tech

    Site Contributor
    250+ Posts
    • Feb 2011
    • 258
    #1

    [CQ] Sharp BP B540WR

    I went out on this sharp BP B540WR. It makes a thick black line when scanning from the Glass and the ADF. Internal prints are fine as you can see there is one good page showing the meter count ( its a brand new machine) I am leaning towards the CCD/Scanner. Just wondering if anyone has seen this before.. I have attached pictures. One copy of the printed page report, Precision Roller test chart and a Sky Shot Also could anyone help me with a parts manual.

    Any help would be appreciated as the client is 1.5 hrs away.

    Thanks !!!
    Attached Files
    Tags: None
    • ihatefinishers13
      Senior MFP Technician

      500+ Posts
      • Feb 2020
      • 693
      #2
      Haven't seen anything THAT bad before... Good news is, it's likely under warranty still, but you can't just replace things on warranty on a whim, unfortunately. You have to KNOW what is wrong. Is there a calibration chart for the scanner? We've resolved an issue similar to this on duplex with a DSPF, and calibrating it with the white reference sheet.
        👍 1

        Comment

        • tmw
          Trusted Tech

          250+ Posts
          • Dec 2013
          • 259
          #3
          Possible bad ccd if the charts don't work.
            👍 1

            Comment

            • austonrush
              Sharp & HP Tech

              100+ Posts
              • Jan 2010
              • 234
              #4
              this is definitely a bad ccd IMO

              Get it replaced under warranty

                Comment

                Previous template Next
                Working...