MX-3570 Melted ADF rollers

[ihatefinishers13]

MX-753DF SPF Roller Kit has all 3 Pickup,Feed and Separation Rollers in it

Yes, that's the old style separation roller, I'm looking for the new one, NROLR2243FCZZ

[Doug.P]

As far as I know the new style is only available as a part and is not included in any kit as of yet. You would thank that they should update to the new style separation roller in all the ADF kits that use that style separation roller.

[ihatefinishers13]

As far as I know the new style is only available as a part and is not included in any kit as of yet. You would thank that they should update to the new style separation roller in all the ADF kits that use that style separation roller.

You'd also think that the tandem trays on a fast machine(8081) would last longer than 100k, but noooooo. They should have the 850 feed set by default but they don't. I've heard it's possible to use them, but not sure we want to risk it.

[Imprestik]

Is there a kit with the CR5 roller in it? I've found that Sharp doesn't really give out kit numbers anymore.

I don't use kits, just separate 13 digit part numbers for the document feeder rollers

[Steve Tech]

You'd also think that the tandem trays on a fast machine(8081) would last longer than 100k, but noooooo. They should have the 850 feed set by default but they don't. I've heard it's possible to use them, but not sure we want to risk it.

We use the following for Polaris and Hercules

NROLR1466FCZ2 (feed and separation)
NROLR1467FCZ2 (pickup)

Apparently these are designed to feed to the right

AR620RT and MX850RT designed to feed to the left (bypass and LCT)

Apparently the tread on the tyres are opposite, or so I'm told