Cloning the SSD on BP's

[Hart]

So it appears that I can't use SSD on BCR4 models (don't know about CR4) ...
I've tried WD Blue, Crucial MX500, Kingston KC600, and an ADATA.
The models will try to format them for almost a minute then boot with E7-03, same experience in 62-01, ERROR after 20-30 seconds.
HDD is okay.

[ihatefinishers13]

So it appears that I can't use SSD on BCR4 models (don't know about CR4) ...
I've tried WD Blue, Crucial MX500, Kingston KC600, and an ADATA.
The models will try to format them for almost a minute then boot with E7-03, same experience in 62-01, ERROR after 20-30 seconds.
HDD is okay.

Is this after copying data from a known good SSD? And also was it B/M keyed? We tried with an M key, but it didn't work. We don't have any B/M keyed drives or we'd try that.

[Hart]

? It's a 2.5 SATA SSD, the key is only for M.2 connector (CR5 models).
The copier will format a new drive at first boot if it's brand new, or throw a U6 error and you can format it with 62-01.

[ihatefinishers13]

? It's a 2.5 SATA SSD, the key is only for M.2 connector (CR5 models).
The copier will format a new drive at first boot if it's brand new, or throw a U6 error and you can format it with 62-01.

Sorry, thought you meant the BP series. What is a BCR4 model? Haven't heard that reference before.

[Hart]

Monochrome CR4, M2630 M3050 M3070 ... M6050 M6070

[ihatefinishers13]

Monochrome CR4, M2630 M3050 M3070 ... M6050 M6070

Ahhh okay, would have never guessed that. We haven't had a monochrome hard drive fail, but we've put HDDs in the color 70 series no problem, but I don't think we've tried an SSD. We've put SSD's in the 71 series no problem, so long as we put the copied files on it first.

[Squiggy]

We've been using transcend with a AVIO Duplicator on both color and B/W and so far no issues.

[lky1978]

We've been using transcend with a AVIO Duplicator on both color and B/W and so far no issues.

HI, can give me transcend ssd model which support cr4 b/w model

[Squiggy]

This What We Have Been Using

[ihatefinishers13]

This What We Have Been Using

The one I pulled from a 70c55 was 256gb.. Interesting that you haven't had issues with the 128gb version

[Hart]

HDD Capacity:
BP-50Cxx/ BP-55C26: 128GB SSD (STD), BP-60Cxx/ BP-70Cxx: 256GB SSD (STD),
Opt: 512GB SSD with BP-SD10

[Hart]

BCR4.5 (M6071) did not accept my SSD this morning.

[harps05]

This is what I've been using:

https://www.amazon.com.au/Silicon-Power-128GB-Internal-SP128GBSS3A55M28/dp/B07BWBHZ94?sr=8-8&th=1

https://www.amazon.com.au/ORICO-SATA-Enclosure-Adapter-Smart-DDNV/dp/B0C2HB4N2Q?sr=8-5

Rip'd via Raw Copy Tool the same way as the CR4's. Takes a lot longer, but works fine.

[ihatefinishers13]

BCR4.5 (M6071) did not accept my SSD this morning.

https://service.sharpamericas.com/IdncService/Bulletin/CCE-2921R.pdf

[Hart]

And ofc Sharp France doesn't communicate on this ...

RH-IX0379FCPZQ
354€
Seems legit