Sharp AR 157e

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • vstar
    Trusted Tech

    100+ Posts
    • Aug 2007
    • 176
    #1

    Sharp AR 157e

    Would anyone happen to know what you need to do, to set up developer on one of these. We don't normally work on Sharps, but a customer called and it needs the dv unit replaced. We have the developer on hand but I am not sure what sim it is to do setup. Also, will this clear the lite on op panel.

    Thanks
    Cameron
    Tags: 157e, sharp, sharp ar
    • tmaged
      Owner/Service Manager

      Site Contributor
      1,000+ Posts
      • Oct 2008
      • 1866
      #2
      There is no DV set/stir on these. 20-1 resets maint. 24-6 resets DV counter, 24-7 drum.
      Hope that helps !
      -Tony
      www.dtios.com
      Become a fan on Facebook

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22995
          #3
          Like tmaged says. Vacuum the developing unit out clean, and pour in the new developer. Reset the counter simulations listed and you're good to go. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • vstar
              Trusted Tech

              100+ Posts
              • Aug 2007
              • 176
              #4
              Thanks guys, that really helps.
              One more question, do you get in to sim by C- interupt, 0- interupt, or some other way?

              Thanks

              Cameron

                Comment

                • tmaged
                  Owner/Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Oct 2008
                  • 1866
                  #5
                  PM Sent
                  Hope that helps !
                  -Tony
                  www.dtios.com
                  Become a fan on Facebook

                    Comment

                    • vstar
                      Trusted Tech

                      100+ Posts
                      • Aug 2007
                      • 176
                      #6
                      Thanks
                      tmaged


                      Cameron

                        Comment

                        Previous template Next
                        Working...