sharp ar-286 H5-01 error code HELP???

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • bilyahn
    Service Manager

    1,000+ Posts
    • Dec 2006
    • 1470

    #16
    Originally posted by Akitu
    Epic thread necro, 2007. +1

    No, this comment was not meant to contribute anything, and I haven't seen an AR-286 ever.
    I've seen 1 and we still have it in service.

    Comment

    • videohockey

      #17
      Originally posted by bilyahn
      Have you tried using the other tray? Seems like from what you are saying it is a paper feed issue out of the tray. Jam code would help a lot.
      There is no jam code displayed. There is no paper jammed in the unit. In fact there is no paper in any of the trays.

      Comment

      • Akitu
        Legendary Frost Spec Tech

        Site Contributor
        2,500+ Posts
        • Oct 2010
        • 2595

        #18
        I would probably be too new to the copier game to have seen one, and from what I've seen of our lists, none of our customers have one.
        Cthulhu for president! Why settle for the lesser evil?

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22989

          #19
          If you want to act like a service person you can start by purchasing a manual and reading it. That what us professionals do, a lot. When you figure out how to access simulation 22 you will be able to view jam codes. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

          Comment

          • ZOOTECH
            Senior member of CRS

            Site Contributor
            2,500+ Posts
            • Jul 2007
            • 3375

            #20
            Originally posted by JDE75
            P * C * 14 Then 1 For Yes And Follow On Screen Directions, Code Should Clear Out.

            Jamie
            For this model and all Cougars, to access TC it is P - Int - C - Int.
            "You can't trust your eyes, if your mind is out of focus" --

            Comment

            • videohockey

              #21
              Originally posted by blackcat4866
              If you want to act like a service person you can start by purchasing a manual and reading it. That what us professionals do, a lot. When you figure out how to access simulation 22 you will be able to view jam codes. =^..^=
              I guess this isn't a place to get answers then

              Comment

              • blackcat4866
                Master Of The Obvious

                Site Contributor
                10,000+ Posts
                • Jul 2007
                • 22989

                #22
                Sorry. Professionals look up their own codes. I don't do it for other techs. RTFM.
                If you'd like a serious answer to your request:
                1) demonstrate that you've read the manual
                2) demonstrate that you made some attempt to fix it.
                3) if you're going to ask about jams include the jam code.
                4) if you're going to ask about an error code include the error code.
                5) You are the person onsite. Only you can make observations.

                blackcat: Master Of The Obvious =^..^=

                Comment

                • Akitu
                  Legendary Frost Spec Tech

                  Site Contributor
                  2,500+ Posts
                  • Oct 2010
                  • 2595

                  #23
                  You can get your answers, and we're more than happy to give them, however I'd like to think most of us try to keep the SERVICE modes in the service industry, considering our employers (and in some unfortunate circumstances, the techs themselves) pay to get the manuals to learn how to get into the service modes and what all the service notifications mean.
                  Cthulhu for president! Why settle for the lesser evil?

                  Comment

                  • videohockey

                    #24
                    Originally posted by blackcat4866
                    Sorry. Professionals look up their own codes. I don't do it for other techs. RTFM.
                    Get a life.

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22989

                      #25
                      I've got a life, and a good one.

                      I'm not the one looking to cheap my way into some free service.
                      Pay the tech. We go through a lot of training and experience to get where we're at, and we're worth it.

                      By the way, I've helped plenty of endusers like yourself that show some initiative, and read the manual. This isn't the public library. You do your own legwork.
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                      Comment

                      Working...