[Jamming] sharp ar-200 paper jamming

[Guest]

i have a sharp ar-200 that is jamming the paper right next to the drum unit can someone tell me were i can find a tech in the orlando fl area.
thanks

[Silvertoast]

looks like the gear has stripped in the fuser and isnt turning, as far as a tech use the yellow pages

[ztorque]

looks like the gear has stripped in the fuser and isnt turning,

do you know how i can fix this on my end or maybe a site to buy the parts that i need
thanks

[OMD-227]

Silvertoast is right by the looks of it. The fuser drive gear has a small pin which breaks off after a long life and causes the upper heat roller to stall. The pictures are a good example of what happens.

The part for the gear is NGERH0540FCZ3, or replace the whole fuser unit if the rollers are worn & the frame is warping.

[ztorque]

Silvertoast is right by the looks of it. The fuser drive gear has a small pin which breaks off after a long life and causes the upper heat roller to stall. The pictures are a good example of what happens.

The part for the gear is NGERH0540FCZ3, or replace the whole fuser unit if the rollers are worn & the frame is warping.

ok thanks, you know were i can get this parts from.

[OMD-227]

Geeez mate, call your friendly local Sharp agent. They'll have it in stock.
Look them up. Its not something you can just pickup anywhere OK.

[ztorque]

ok didn't think i was going to get you upset sorry, im not a tech guy and i never order any parts for something like this but thanks anyways

[OMD-227]

Who's upset??

Not me.

You need a tech to look at your machine. They will have the parts required.

I gave you the part number, and if you are a keen 'tech type' person who would like to have a crack at fixing this, then go for it. You just need to buy that part first.