I done a regular PM on the machine and now about a week later I am getting specks on one side of copy. Looks like sprinkles. Dev calibrated within limits correctly no problems. 
-
-
Cleaning Unit.
Common on Leopards. The lower seal tends to collect a lot of paper lint. My personal theory here is that since this machine has pad separation in the paper trays, a gob of paper lint collects on the pad, then is released onto a passing sheet of paper and carried up to the lower cleaning seal. For customers who use colored paper the color of the fiber will match their paper color.
At any rate, the lower seal will become deformed and allow toner from the cleaning unit to sprinkle down onto the copies.
Replace the cleaning unit (the seal is part of the unit), but order the Andromeda cleaning unit (CFRM-0049RS5C). It has a doubled cleaning seal in the center to help minimize the problem. It still happens, but it takes longer.
I have heard of other techs taking the upper developer seal from the transfer kit and using it as a lower cleaning seal. I don't recommend it. It will leak much worse.If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Comment