Sharp 507

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Vanya
    • May 2025
    #1

    Sharp 507

    Day kind companions !!!
    Sharp 507-after has cleaned a dirt in the photoshaft block, from piles and also has blown коротроны, there were fat strips on a copy along sheet in width of 2 sm and on all sheet on length-it at blank leaf copying after I have checked up contacts коротронов at device start at loading has appeared the message on toner shortage. When I have pulled out a cartridge I have seen that a photoshaft all black, I дастал and have scrolled it manually, ракель have cleared a toner on it, after assemblage and inclusion the message has repeated also a photoshaft again all black.
    What for a hogwash such prompt please???
    sharp 507:http://www.startcopy.ru/bbs1/msg/1965.htm?35
    Last edited by Guest; 03-05-2011, 08:26 PM.
    Tags: black, blank, cartridge, copy, copyi, copying, message, pulled, sharp, sheet, start, toner, understanding
    • Silvertoast
      Trusted Tech

      250+ Posts
      • Feb 2010
      • 270
      #2
      haveing a hard time understanding ur post, but from what i can gather sounds like u need a new toner roller (its a sponge roller in the toner hopper) if it has gotten hard u will keep gettin a add toner condition, if it has started falling apart u will get way too much toner and will affect copy quality.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22927
          #3
          That's as good a guess as any. I am understanding less than 25% of the post.

          Vanya, please try again with shorter sentences. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • pjdbm
              Trusted Tech

              250+ Posts
              • Sep 2007
              • 360
              #4
              I know this machine well and cant make heads or tail of this post.

                Comment

                • CCS
                  Trusted Tech

                  Site Contributor
                  250+ Posts
                  • Feb 2008
                  • 266
                  #5
                  Sounds like need to replace toner roller to me also, dont forget the toner roller side seals as well...

                    Comment

                    Previous template Next
                    Working...