ARm700U MFP Controller Trouble

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • BMSInc95
    Technician

    50+ Posts
    • Sep 2011
    • 66
    #1

    [Electrical] ARm700U MFP Controller Trouble

    I have a machine that does not detect when a computer is connected to it. The LED's light up on the PWB but when a USB or parralell is plugged in nothing. Just trying to use as a host based printer. Copying works fine. Any help would be appreciated.
    Tags: arm, controller, copyi, copying, light, mfp, nec, printer, roller, trouble
    • ZOOTECH
      Senior member of CRS

      Site Contributor
      2,500+ Posts
      • Jul 2007
      • 3375
      #2
      Re: ARm700U MFP Controller Trouble

      Originally posted by BMSInc95
      I have a machine that does not detect when a computer is connected to it. The LED's light up on the PWB but when a USB or parralell is plugged in nothing. Just trying to use as a host based printer. Copying works fine. Any help would be appreciated.
      Usually the USB and parallel ports are for upgrading the flash on this model - have not heard or seen it work as a GDI printer.
      "You can't trust your eyes, if your mind is out of focus" --

        Comment

        • mojorolla
          The Wolf

          2,500+ Posts
          • Jan 2010
          • 2583
          #3
          Re: ARm700U MFP Controller Trouble

          I believe an AR-P19 option is needed for any printing on the U model.
          Failing to plan is planning to fail!!!

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22995
              #4
              Re: ARm700U MFP Controller Trouble

              Originally posted by mojorolla
              I believe an AR-P19 option is needed for any printing on the U model.
              Agreed. I believe that the USB and parallel are for loading firmware Only on the U models. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • tmaged
                  Owner/Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Oct 2008
                  • 1866
                  #5
                  Re: ARm700U MFP Controller Trouble

                  Yep these guys are correct. The only time those ports are active is during firmware upgrade. Same with the AR-M355U & AR-M455U.
                  Hope that helps !
                  -Tony
                  www.dtios.com
                  Become a fan on Facebook

                    Comment

                    Previous template Next
                    Working...