i have a mxm904 sharp. the first copy comes out nice but the rest of the copies are coming out with dots on them almost in a perfect line. but not side to side but top to bottom. PLS HELP
-
-
Re: lines on copies sharp mx-m904 need help
I would check the fuser. Normally I get more that just dots at about 35 - 50 mm from the lead edge. Fuser heat roller will look okay, press roller may or may not be wrinkled. Where are you at in the PM cycle?
Good luck
Bil -
Re: lines on copies sharp mx-m904 need help
Please attach a scan of the quality problem. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: lines on copies sharp mx-m904 need help
Hi
we have had something like what you describe dotted lines top to bottom a3.
Our tech changed the dm cleaning bladeComment
-
Re: lines on copies sharp mx-m904 need help
Here is an example of our fault
Comment
Comment