hi dear friends. i have a copy quality issue model sharp mx-3610 printer and i tried to replace developper color or high voltage board also & adjust procon halfton printer color callibration not yet solve the problm. pls chk the attachment print & give me some technical quarees .....
-
-
Re: copy quality problm
And what is the problem? It would help if you marked where the faults are and what direction the paper travelled. -
Re: copy quality problm
I'm going to make a WAG that there isn't any cyan on that page. Maybe you should look into that? =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: copy quality problm
Copy quality is very late copy or print or not mixing proper color. Ones i take print out different color coming.Comment
-
Re: copy quality problm
Print out a sim 64-5 test pattern and scan that for us. Might help us a little more than the attached scan. Just use the default setting and you will get a color and monochrome test print.
Good luck.
BilComment
Comment