toshiba 3508a

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • billmcwho
    replied
    Re: toshiba 3508a

    just a follow up. Thanks again Rusty Harris! The ccd side of the lens was dusted, cleaned it and the ccd, faded copies are gone!

    Leave a comment:


  • blackcat4866
    replied
    Re: toshiba 3508a

    A sample would be nice ... and consumable yields. =^..^=

    Leave a comment:


  • Rusty.Harris
    replied
    Re: toshiba 3508a

    Couple things. Any chance the clips that hold the mirrors have popped loose?
    Next, double check between the lens & the CCD element for any dust. If the environment
    is "dusty" sometimes dust can get on the back side of the lens and the CCD.

    Leave a comment:


  • billmcwho
    started a topic toshiba 3508a

    toshiba 3508a

    this machine is copying light on the bottom of page. The prints from the computer are fine. Doesnt matter if you run off glass or dsdf. as far i could see there are no baffles to change the amount of light . The troubleshooting guide mentions (a shading correction plate).If there is one i dont see it. thanks in advance!!!
Working...