[CQ] Toshiba Estudio 351C

[jcontractor]

Hi,

Here is a print out from a Toshiba Estudio 351C. I does the same in print or Copy.
I change the secon transfer roller, it was defective (Deformed).
I clean all optics on scanner but as we notice this is a print out. This problem doesn't belong to scanner.

I clean all fuser and inspect transfer belt, but I don't change the first transfer roller at Transfer Belt Unit. I didn't replace the Transfer Belt. I have those parts spare but I need some advice before proceed.

I didn't clean the laser lenses.

Please advice, thanks in advence.Print From Toshiba Estudio 351C English.pdf

[Mr Spock]

Start by cleaning the machine, and I mean everything. pull the transfer belt out and clean all the rollers under the belt. clean the laser glass, and check the drum,drum blade, and main charge.

[JustManuals]

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest collection of manuals | Instant Downloads - Just Manuals | The Internet's largest collection of manuals | Instant Downloads


Paul@justmanuals.com

[jcontractor]

Quick question:

I have an Imagistic machines TBU kit with cleaning blade and transfer roller. It contains one transfer roller only.
Is the Imagistic CM3530/4530 similar to the studio 351C, may I use this kit with the Toshiba estudio 351C.

The Imagistic Kit Part number in the box said: 6LA4796810

Please advice about this.

[jcontractor]

Start by cleaning the machine, and I mean everything. pull the transfer belt out and clean all the rollers under the belt. clean the laser glass, and check the drum,drum blade, and main charge.

I already perform all this procedures. All was cleaned very well. I didn't touch the TBU. Just Blow out the dust on the TBU.

[ToshibaTech]

Take apart the TBU. Clean all the rollers with scotch brite. This may help you especially with the lighter lines I see in the image. Clean the inside of the belt with a soft clean rag and alcohol. Belt comes apart by taking off the cleaning unit, letting down the middle roller(two brackets), then moving the roller at the opposite end of the cleaner into the hole made in the frame so you have enough slack to pull the belt off. Not very clear instructions, but it is pretty obvious I think.

[jcontractor]

Take apart the TBU. Clean all the rollers with scotch brite. This may help you especially with the lighter lines I see in the image. Clean the inside of the belt with a soft clean rag and alcohol. Belt comes apart by taking off the cleaning unit, letting down the middle roller(two brackets), then moving the roller at the opposite end of the cleaner into the hole made in the frame so you have enough slack to pull the belt off. Not very clear instructions, but it is pretty obvious I think.

I do all of that as per you mention.
This machine have 87,000 copies in the total counter.
Do you recommend change any part?

That machine give me impression that was stopped for long time.
The second transfer roller was deformed caused by constant pressure in one place for long time. I replaced and the image get better big time, but it continue with image quality issues.

Any advice will be appreciated.

[jcontractor]

I do all of that as per you mention.
This machine have 87,000 copies in the total counter.
Do you recommend change any part?

That machine give me impression that was stopped for long time.
The second transfer roller was deformed caused by constant pressure in one place for long time. I replaced and the image get better big time, but it continue with image quality issues.

Any advice will be appreciated.

Is the TBU and cleaning blade of this estudio 351C the same of the Estudio 3511??

[ToshibaTech]

I'm pretty sure they are different. It will be obvious. One thing to consider is you will not get great color copies on this machine period. A full PM (developers, drum, charge, blades, 2nd Transfer, and THOROUGH cleaning) will get you as good as it will get and that is considered "business" color. I.E. color quality suitable for graphs, charts, text. Passable on photographs but not spectacular by any means. It shouldn't need a drum but depending on how many color copies it might need developers.

[jcontractor]

I'm pretty sure they are different. It will be obvious. One thing to consider is you will not get great color copies on this machine period. A full PM (developers, drum, charge, blades, 2nd Transfer, and THOROUGH cleaning) will get you as good as it will get and that is considered "business" color. I.E. color quality suitable for graphs, charts, text. Passable on photographs but not spectacular by any means. It shouldn't need a drum but depending on how many color copies it might need developers.

First. Thanks a lot for your valuable advice.
Second, this machine have a total counter of 87,000 copies.
I already replace the 2nd transfer roller.

[ameritech]

Hello jcontractor, I was working on a 281c, similiar machine, I change the belt and drum, but it had the same problem, so I change the transfer roller that is in the transfer belt unit, and that fix the problem.

[jcontractor]

Hello jcontractor, I was working on a 281c, similiar machine, I change the belt and drum, but it had the same problem, so I change the transfer roller that is in the transfer belt unit, and that fix the problem.

That's really a good feedback from you.
Good news form me, I will try the Transfer roller first.
I'm was planing to change all TBU, Transfer Roller, Belt itself and cleaning Blade.
But right now I don't have the cleaning blade on hand and I was stocked, but I have the transfer roller, now I have an a clear idea and I will proceed.

I really appreciate the comment.

[jcontractor]

I'm pretty sure they are different. It will be obvious. One thing to consider is you will not get great color copies on this machine period. A full PM (developers, drum, charge, blades, 2nd Transfer, and THOROUGH cleaning) will get you as good as it will get and that is considered "business" color. I.E. color quality suitable for graphs, charts, text. Passable on photographs but not spectacular by any means. It shouldn't need a drum but depending on how many color copies it might need developers.

It is the Developer of the Estudio 3511 compatible with the Estuido 351C?

[jcontractor]

I'm pretty sure they are different. It will be obvious. One thing to consider is you will not get great color copies on this machine period. A full PM (developers, drum, charge, blades, 2nd Transfer, and THOROUGH cleaning) will get you as good as it will get and that is considered "business" color. I.E. color quality suitable for graphs, charts, text. Passable on photographs but not spectacular by any means. It shouldn't need a drum but depending on how many color copies it might need developers.

Yes, I will perform a Full PM, Toner, Developer, TBU, !st transfer roller. And I found this information from one of our suppliers, the devolper of the 3511 is compatible with the 351C.
I have plenty of parts of the 3511, Also I found that the 1st transfer roller is compatible as well.

[jcontractor]

Hello jcontractor, I was working on a 281c, similiar machine, I change the belt and drum, but it had the same problem, so I change the transfer roller that is in the transfer belt unit, and that fix the problem.

Thanks, also I clean the Laser unit and It's printing better.