dv coming out on copies and a grey band 3 inches wide on leading edge on back of copies front to back. not on all copies but about half of them. tried a used trans roller from another machine with same results
-
-
Re: es 250 developer coming out on copies
Replace PU-1610. That's an old box so even if it isn't calling for replacement it's probably worn out.Why does every customer think they're the first one to ever say: "you've been here so much we should get you an office, ha, ha, ha"? -
Re: es 250 developer coming out on copies
what is pu-1610 and its only 4 or 5 yrs old I think the build date is 2010. we sell used equipment and usually only buy off lease equipment so at least 3 yrs and usually 4 . sometimes older. I just started working on Toshibas 3 months ago the older ones seem better e-232 that seriesComment
-
Re: es 250 developer coming out on copies
oh ok the drum I knew that number looked familiar. why does everyone here and smarka now talk in code. trust me im a tech, every time I post something someone says call a tech. I have been a tech since 1992 steady. I just work on a lot of different brands. thanks for your help the drum is almost new but I will try that.Comment
-
Re: es 250 developer coming out on copies
The part you need to change is the whole process unit. Comes as one unit on this model.It didn't say that I couldn't do it in the manual.Comment
-
Re: es 250 developer coming out on copies
And the whole process unit is called a PU-1610S. But apparently that's a secret code language...
Why does every customer think they're the first one to ever say: "you've been here so much we should get you an office, ha, ha, ha"?Comment
-
Re: es 250 developer coming out on copies
Whenever I see a word I don't know I punch it into Google, then I know what it means. Even the secret-code.
Personally, I would check to see if any of your developer is pouring out through the front or rear developer seals. Especially if that pile of developer was at the rear shorting out the developer bias contact under the developer unit. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: es 250 developer coming out on copies
ok I put an image unit from another machine in it it worked fine for a month then it came back so I called tech support they said change the developer. I changed the developer and it has been fine now for another month. thanks for the helpComment
-
Re: es 250 developer coming out on copies
well the guys I talked to in tech support did not call it pu-1610s he called it the image unit just like I call the I\u from any machine.Comment
Comment