es 250 developer coming out on copies

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • barrylee66
    Technician
    • Oct 2010
    • 37

    #1

    es 250 developer coming out on copies

    dv coming out on copies and a grey band 3 inches wide on leading edge on back of copies front to back. not on all copies but about half of them. tried a used trans roller from another machine with same results
  • arnh79
    Trusted Tech

    Site Contributor
    VIP Subscriber
    250+ Posts
    • Apr 2010
    • 467

    #2
    Re: es 250 developer coming out on copies

    Replace PU-1610. That's an old box so even if it isn't calling for replacement it's probably worn out.
    Why does every customer think they're the first one to ever say: "you've been here so much we should get you an office, ha, ha, ha"?

    Comment

    • barrylee66
      Technician
      • Oct 2010
      • 37

      #3
      Re: es 250 developer coming out on copies

      what is pu-1610 and its only 4 or 5 yrs old I think the build date is 2010. we sell used equipment and usually only buy off lease equipment so at least 3 yrs and usually 4 . sometimes older. I just started working on Toshibas 3 months ago the older ones seem better e-232 that series

      Comment

      • barrylee66
        Technician
        • Oct 2010
        • 37

        #4
        Re: es 250 developer coming out on copies

        oh ok the drum I knew that number looked familiar. why does everyone here and smarka now talk in code. trust me im a tech, every time I post something someone says call a tech. I have been a tech since 1992 steady. I just work on a lot of different brands. thanks for your help the drum is almost new but I will try that.

        Comment

        • michaelc
          Field Tech

          Site Contributor
          500+ Posts
          • Mar 2011
          • 590

          #5
          Re: es 250 developer coming out on copies

          The part you need to change is the whole process unit. Comes as one unit on this model.
          It didn't say that I couldn't do it in the manual.

          Comment

          • arnh79
            Trusted Tech

            Site Contributor
            VIP Subscriber
            250+ Posts
            • Apr 2010
            • 467

            #6
            Re: es 250 developer coming out on copies

            And the whole process unit is called a PU-1610S. But apparently that's a secret code language...
            Why does every customer think they're the first one to ever say: "you've been here so much we should get you an office, ha, ha, ha"?

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22997

              #7
              Re: es 250 developer coming out on copies

              Whenever I see a word I don't know I punch it into Google, then I know what it means. Even the secret-code.

              Personally, I would check to see if any of your developer is pouring out through the front or rear developer seals. Especially if that pile of developer was at the rear shorting out the developer bias contact under the developer unit. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

              Comment

              • barrylee66
                Technician
                • Oct 2010
                • 37

                #8
                Re: es 250 developer coming out on copies

                ok I put an image unit from another machine in it it worked fine for a month then it came back so I called tech support they said change the developer. I changed the developer and it has been fine now for another month. thanks for the help

                Comment

                • barrylee66
                  Technician
                  • Oct 2010
                  • 37

                  #9
                  Re: es 250 developer coming out on copies

                  Originally posted by arnh79
                  And the whole process unit is called a PU-1610S. But apparently that's a secret code language...
                  well the guys I talked to in tech support did not call it pu-1610s he called it the image unit just like I call the I\u from any machine.

                  Comment

                  Working...