Xerox 252 firmware

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Phil B.
    Field Supervisor

    10,000+ Posts
    • Jul 2016
    • 22798

    #16
    Re: Xerox 252 firmware

    Originally posted by dalman
    I can't hire tech ,all are shut down due to the Corona virus
    Well maybe someone will sell you a PWS with all cables and software's needed. This is a very big problem we techs face... end users thinking they have the tools and skills needed to fix their units.

    Sent from my SM-G960U using Tapatalk

    Comment

    • dalman
      Technician
      • Mar 2020
      • 10

      #17
      Re: Xerox 252 firmware

      Originally posted by xcopytech
      Check crossover cable between machine and fiery
      Do you have small bustled fiery or standalone
      I checked it out
      small bustled

      Comment

      • dalman
        Technician
        • Mar 2020
        • 10

        #18
        Re: Xerox 252 firmware

        Originally posted by Phil B.
        Well maybe someone will sell you a PWS with all cables and software's needed. This is a very big problem we techs face... end users thinking they have the tools and skills needed to fix their units.

        Sent from my SM-G960U using Tapatalk
        Thanks again for your guidance
        As I said : I'm not a technician but in this situation I have to find a way.

        Comment

        • xcopytech
          Service Manager

          1,000+ Posts
          • Aug 2006
          • 1792

          #19
          Re: Xerox 252 firmware

          Can you make copy on dc252?
          On fiery you have a small lcd, what code you have on it

          Comment

          • dalman
            Technician
            • Mar 2020
            • 10

            #20
            Re: Xerox 252 firmware

            Originally posted by xcopytech
            Can you make copy on dc252?
            On fiery you have a small lcd, what code you have on it
            Do you mean to copy a file with USB in the dc252?

            Comment

            • Phil B.
              Field Supervisor

              10,000+ Posts
              • Jul 2016
              • 22798

              #21
              Re: Xerox 252 firmware

              Originally posted by dalman
              Do you mean to copy a file with USB in the dc252?
              no just a simple copy from ADF or glass

              Comment

              • xcopytech
                Service Manager

                1,000+ Posts
                • Aug 2006
                • 1792

                #22
                Re: Xerox 252 firmware

                Just a copy. To see do you have a problem with machine or with fiery

                Comment

                • Detonation
                  Trusted Tech

                  Site Contributor
                  250+ Posts
                  • Feb 2010
                  • 403

                  #23
                  Re: Xerox 252 firmware

                  Exactly how did you put the DC252 back to factory defaults? Did you use 'Delete All Data'?

                  The crossover ethernet cable between de DC252 en the Fiery bustled is only needed for scanning. The large SCSI cable takes care of communication between the Fiery and the DC252. If you boot the DC252 the Fiery should also boot. There is a tiny LCD screen on the Fiery which should display '00' if all is good. After 5 minutes or so, you should be able to find 'network controller' settings in your system settings. If it doesn't show up there, you have a defective Fiery, a bad cable, or a bad video card on the ESS.

                  Comment

                  Working...