Re: Xerox workcenter 7232
The copy/print quality is poor.
Xerox workcenter 7232
Collapse
X
-
Re: Xerox workcenter 7232
Nothing else to do, only check print & copy quality.Leave a comment:
-
Re: Xerox workcenter 7232
When you replace the ROS what NVM settings do change ?Leave a comment:
-
Re: Xerox workcenter 7232
Are there any settings
to change in the service mode after you replace the ROS ?Leave a comment:
-
Guest repliedThanks.will try thatLeave a comment:
-
The light intensity of LD2 doesn't reach specified value. check connections p/j401 on mcu pwb and p/j140 on ros unit. If it is ok, check the wires between j401 and j140 for short or open circuit. if the wires are ok, you should replace ros unit.Leave a comment:
-
Xerox workcenter 7232
I ve got a xerox workcenter 7232 that is giving me error 061 325.plse can you help
Leave a comment: