WC7232

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • imagewalker
    Technician
    • Jun 2010
    • 94
    #1

    WC7232

    xerox wc7232 Getting light copies on the rear side of the machine on black. Machine is level but i notice when i removed the developer unit that one side the developer is not adhering properly to the cylinder this machine only has a total of 20k has any one seen a failure so soon on the developer units....
    Tags: 232, access, adjust, black, blade, close, copies, developer, developer housing, developer unit, failure, height, level, light, light copies, off, one, rear, roll, screws, side, total, unit, units, wc7232, xerox
    • Milo Wilson
      Trusted Tech

      250+ Posts
      • Feb 2009
      • 499
      #2
      Probably the Blk dev knock off blade has slipped down close to the developer roll. Access the screws on the developer housing for the knockoff blade and adjust to proper height.

        Comment

        • imagewalker
          Technician
          • Jun 2010
          • 94
          #3
          Thanks that worked

          Originally posted by Milo Wilson
          Probably the Blk dev knock off blade has slipped down close to the developer roll. Access the screws on the developer housing for the knockoff blade and adjust to proper height.

            Comment

            Previous template Next
            Working...