Hi All, hope someone can offer some help...
Have a C75 which is working like a charm. Recently we had a grinding noise coming from the back...
34 results in 0.0233 seconds.
-
Colour issue (banding/arcing) on Xerox C75 Press
-
Xerox Docucolor 260 - Red and Purple are printing more like orange
Hi all,
The red and purple are coming more like orange.
One more issue I noticed is that it looks like the printer is not saving... -
wc 7132 black developer material draining out
Hi,
I have changed the developer housing 2 times and the error still occurs.
Only black developer material draining out from dev. house.... -
Xerox Workcentre Pro 90
I am getting a 09-304 error, does anyone know what this means and what I can do about it? -
Need Help! Xerox Workcentre 7132
I have a Xerox Workcentre 7132 that keeps displaying code 092-310, I read from this forum that I should change the developer housing, which I did and... -
WC7232
xerox wc7232 Getting light copies on the rear side of the machine on black. Machine is level but i notice when i removed the developer unit that one side... -
Xerox 510dp dumping develoger
Problem: Xerox 510dp dumping developer, Code or error 3 when doing electrostatics 09-04.
I have swapped drum, developer housing, charge and transfer/detact... -
docucolor 250 fading prints
My docucolors prints are faded along one of the long edges. This can be seen clearly on a magenta and cyan solid print. I have cleaned the ROS glass and... -
Xerox Dc12 Fault 4 Color Dots On Prints
RE: Xerox Dc12 Fault 4 Color Dots On Prints
This is a chat conversation on Facebook with Gustav Gonget and Peter Montgomery about... -
Xerox DC12 - Noise from deleloper
Sometime my Xerox DC12 have noise like metal to metal friction, increasingly in time.
i located, that noise coming from developer housing (in front...Last edited by JimmyB; 01-07-2010, 09:55 AM. -
dc12
print with cmyk dots on it what is the cause of it sometime after change new drum working fine sometimes after 1000 print cymk dots again thanks any... -
DC5252
Hi,
I am having a problem with yellow in DC 5252 . See the file the centre portion is light and uneven density between the inboard and outboard.... -
help! 7750 fault code 9-456
hello,
The fault code don't cleared .
I have done below;But I have not Engine Control Board ,can you give me help?
... -
xerox DC12 error code : 9-354 please help
hi everybody,
i have a xerox DC12, and i was printing something in colour, and, the machine stopped and show the message : error 9-354. -
Neel Help with Doc 250 Magenta Developer
I have a Doc 250 with about 160,000 prints on the meter
I am getting a long line anytime a do a print that has a lot of Magenta in it....
