[Jamming] Xerox 128 Jams after warm up In fuser

[Bluezman]

Hi all
I have a Xerox 128 that jams after non use and or frist thing in the morning I have replaced the fuser unit and the photo-interrupter and fuser exit flag holder
thanks

BM

[hughesxrx]

order this part it will fix your problem. 848K19761

[Bluezman]

MOD Part??

order this part it will fix your problem. 848K19761

Thanks hughesxrx could you tell me if thats a Mod part# I cant find it in me Edocs

BM

[hughesxrx]

the part was released after the edocs. it was a special part made just for this problem.

[Bluezman]

Xerox Jamming

the part was released after the edocs. it was a special part made just for this problem.

Ok Thanks hughesxrx
BM

[tech9]

Is this the improved fuser exit switch with the ball bearing ? i have the part number as 815K02550. Tip also suggests registration clutch 121k32660.
If not i am intrested in what that part is it may be handy !
Thanks

[dajver]

Replace just the fuser exit switch 815K02550.

[pfinn10]

Would this be the same for a 286? Im having the same problem on a few of our 286 machines

[dajver]

It should be.

[Leonardbez]

Hi
Had the same problem allso replaced fuser exit sensor .It was the gate above the fuser.Remove the inverter and shorten the spring of the gate .No more jamming in the mornings

[shaan]

hi

[Leonardbez]

Hi

[amadeusmbi]

The problem is the fuser exit sensor. With a small adjustment will work very well the old one. If I have permission I will put some pics (I'm going to photograph one today).
Amadeus

[amadeusmbi]

Picture after repair:


DSC01560_resize.JPG

DSC01559_resize.JPG

DSC01556_resize.JPG