Could anyone identify this Transfer Belt?

[Hansoon]

Re: Could anyone identify this Transfer Belt?

tsbservice, the after market belts I have are different. The C280/360 series have a small rubber trail on each edge. The C284/364(e) are completely without and flat. Both do not fit the old C253/353.
Cleaning blades are the same through all 253/353/280/360/284/364(e) series.

Hans

[tsbservice]

Re: Could anyone identify this Transfer Belt?

Since it has a large vertical metal handle on the left side it must be for a BH-C-253/353.
BH-C-280/360 has a very small black plastic there and the BH-C-284/364(e) again a metal handle but with a horizontal orientation.

Personally I find it a good idea to remove that (those) picker finger(s). Sometimes they love to dig in the transfer belt. Seemingly preferable in NEW transfer belts......

[ATTACH=CONFIG]52306[/ATTACH]

Hans

Thanks for the pictures Hans.
Side question - anyone happen to knows if transfer belt unit for BH-C-284/364(e) can be used in place of BH-C-280/360 ?
I mean only belt itself is probably the same but I don't want to disassemble new unit I have.

[Hansoon]

Re: Could anyone identify this Transfer Belt?

Since it has a large vertical metal handle on the left side it must be for a BH-C-253/353.
BH-C-280/360 has a very small black plastic there and the BH-C-284/364(e) again a metal handle but with a horizontal orientation.

Personally I find it a good idea to remove that (those) picker finger(s). Sometimes they love to dig in the transfer belt. Seemingly preferable in NEW transfer belts......

Transfer Belts 20220227_102309.jpg

Hans

[patterson70]

Re: Could anyone identify this Transfer Belt?

As Cat said, definitely Konica Minolta but likely for the older color series such as the BH-C-253/353 since it has the large metal tab at the left to hold it when installing.

Hans

Thanks, I think it's a C280.

[Hansoon]

Re: Could anyone identify this Transfer Belt?

As Cat said, definitely KonicaMinolta but likely for the older color series such as the BH-C-253/353 since it has the large metal tab at the left to hold it when installing.

Hans

[patterson70]

Re: Could anyone identify this Transfer Belt?

Definitely Konica Minolta. Maybe C360, maybe 4e series. If you look at the serial # tag on the belt unit the first four digits should represent the model number. =^..^=

Thank you Mr. Cat!

[blackcat4866]

Re: Could anyone identify this Transfer Belt?

Definitely Konica Minolta. Maybe C360, maybe 4e series. If you look at the serial # tag on the belt unit the first four digits should represent the model number. =^..^=

[patterson70]

Hello, I mislabeled this used Transfer Belt and now I don't know what it belongs to. Argh!

Does anyone recognize which Brand or model it is for? HP?