hp 4250 printer metal film has a conflict

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copyberk-jet
    • May 2025
    #1

    hp 4250 printer metal film has a conflict

    Hi everyone friends ,
    hp 4250 printer metal film has a conflict
    film sometimes gets stuck when writing

    Waiting for your help
    I wonder if fuser oil problem
    What kind of metal film'lerde oil would you recommend
    Tags: 4250, breakdown, business, conflict, film, google, hp 4250, lubrication, maintenance kit, metal, printer, stuck, symptoms
    • prntrfxr
      Service Manager

      1,000+ Posts
      • Apr 2008
      • 1627
      #2
      hp 4250 printer metal film has a conflict

      Um...ok...first of all, 4250 fusers don't use fuser oil. They use a grease, but it needs to be one that can handle high heat and is not petroleum based.

      I would recommend that you just buy a high quality rebuilt one or a new one.
      Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".

        Comment

        • copyberk-jet
          #3
          Thank you for your interest and your first answer
          printer repair technician in a company which I have been working as
          How do you recommend a fuser oil
          Where can I find the oil, or about

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22930
              #4
              No, listen.

              There is no fuser oil. They stopped using that stuff on most machines many years ago. For HP fixing films they need light lubrication inside the fixing film on the heater surface. The most commonly used grease is Molycote HP-500 high temperature grease. Just Google "Molycote HP-500". It's available from almost anybody that sells HP parts.

              =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22930
                  #5
                  Originally posted by copyberk-jet
                  Hi everyone friends ,
                  hp 4250 printer metal film has a conflict
                  film sometimes gets stuck when writing

                  Waiting for your help
                  I wonder if fuser oil problem
                  What kind of metal film'lerde oil would you recommend
                  You know, it occurs to me that I don't have any idea what symptoms are present. Why do you think you need fuser oil? If you explained it above, can you re-phrase?
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • prntrfxr
                      Service Manager

                      1,000+ Posts
                      • Apr 2008
                      • 1627
                      #6
                      hp 4250 printer metal film has a conflict

                      I assumed he was referring to the sleeve not rotating caused by grease breakdown, but if you have no idea that this fuser doesn't use oil, you have no business trying to rebuild it. That's my 2 cents, but then if he screws it up, someone else will make the money trying to fix it and the customer won't use him again (if he's a tech).
                      Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".

                        Comment

                        • Yair45
                          Technician
                          • Mar 2008
                          • 21
                          #7
                          the HP 500 is not available in every country.
                          i use the HP-300 that has the same parameters.

                            Comment

                            • Rob Sandberg
                              Trusted Tech

                              250+ Posts
                              • Jul 2008
                              • 275
                              #8
                              Prntrfxr is right.
                              Do not try to fix the fuser. Replace the fuser.
                              If the printer has not been service before order a maintenance kit Q5421A and do it right the first time.
                              This will allow you to also check the swing plate gear for wear.

                              Rob S

                                Comment

                                Previous template Next
                                Working...