Lexmark MX410 controller replacement

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Cirrus
    Technician
    • May 2008
    • 43

    #1

    Lexmark MX410 controller replacement

    We went to replace this board and an insert in the package says we need the Service Restore Tool. Is this really needed? I do not want to do the replacement until I know the consequences. The manual also shows only the Service Restore Tool. Is there an optional method for saving and restoring the settings?

    Thanks.
  • Lance15
    Service Manager

    Site Contributor
    1,000+ Posts
    • Jun 2015
    • 1073

    #2

    Comment

    • dalewb74
      Service Manager

      Site Contributor
      1,000+ Posts
      • Feb 2018
      • 1117

      #3
      Re: Lexmark MX410 controller replacement

      service restore tool is built to backup the necessary stuff to import into the new controller board once it has been installed. if you don't, then you could lose some stuff. the service manual should describe the entire process of using said tool. all the one's that i have seen in each service manual does.

      Comment

      Working...